Epson 9600, 7600 service manual Initinfo

EPSON Stylus Pro 7600/9600 Revision A

Table 1-48. Maintenance mode 2 setup items (continued)

Top menu	Item menu 1 (Panel display)	Item menu 2	Panel display	Setup value
(Panel display)
	Operation time, environment information counter	-	-	EXEC
	clear (INIT.MENUE)
	Carriage information counter clear (INIT.MENUR)	-	-	EXEC
	Ink system information clear (INIT.MENUS)	-	-	EXEC
	Head information counter clear (INIT.MENUH)	-	-	EXEC
	Cutter information counter clear (INIT.MENUC)	-	-	EXEC
Maintenance information	Ink information 1 counter clear (INIT.MENUA)	-	-	EXEC
initializing menu
	Ink information 2 counter clear (INIT.MENUB)	-	-	EXEC
(INITINFO)	Paper information counter clear (INIT.MENUP)	-	-	EXEC
	Print mode information counter clear (INIT.MENUM)	-	-	EXEC
	Panel setting information counter clear	-	-	EXEC
	(INIT.MENUO)
	Fatal error information counter clear (INIT.MENUF)	-	-	EXEC
	Normal error information counter clear	-	-	EXEC
	(INIT.MENUN)

Note 1: The panel display is English that is common for Japanese / English / French / German / Spanish / Portuguese.

2:Roll paper widths XX are following,

Stylus Pro 7600: 610mm and over ~ 160mm and under is classified at 50mm intervals.

Stylus Pro 9600: 1018mm and over ~ 10mm and under is classified at 100mm intervals.

3:However, if the witdth of the installed paper is smaller than set width, the latter will be used.

Product Description Operating Panel 82