Epson 9600, 7600 Paper feeding adjustment conversion table, † How to change correction values

EPSON Stylus Pro 7600/9600Revision A

1.4.6 Paper feeding adjustment conversion table		† How to change correction values
The adjustment conversion table has four 256byte screens in NVRAM. The details are		„	User table
			The user table can be changed from the SN menu of Maintenance mode 1.
as follows.
	Table 1-49.		(See “1.4.4 Maintenance Mode 1 (p.66)” for details.)
			It can be changed by registering the remote commands paper feeding
Table name	Description		adjustment offset value commands (SN83). It is necessary to save changes
			(SV).
1 Pigment user table	For pigment ink media, can be changed by user, 256byte
		„	System table
2 Dye user table	For dye inku media, can be changed by user 256byte
			The system table can be changed from the Maintenance mode 2 adjustment
3 Pigment system table	For pigment ink media, cannot be changed by user, 256byte
			menu. (See “1.4.5 Maintenance Mode 2 (p.70)” for details.)
4 Dye system table	For dye ink media, user cannot be changed by user, 256byte
		† User table initialization
† Use during printing
		„	Maintenance mode 1
„ User table
			Selecting “User table initialization” in SN menu allows the user to initialize
When the conversion mode is ON in the paper feeding adjustment conversion
			Maintenance mode 1.
mode (SN 0A), the paper feeding adjustment setting (SN 04) m2 parameter		„	Remote commands
will be media ID and indicate user table address. The value stored in this
			Setting m2=00h in paper feeding adjustment offset value registration (SN 83)
address is used as the paper feeding adjustment value. However, if the stored
value is FFh, the table is divided into three parts as shown below. The m2			allows the user to initialize remote commands.

parameter of the paper feeding adjustment setting (SN 04) to be used as the paper feeding adjustment value changes depending on the corresponding ID value.

1.01h ~ 40h Use the value of ID+50h as the paper feeding adjustment value.

2.41h ~ C0h Use ID as the paper feeding adjustment value.

3.C1h ~ FFh Use the value of ID-64h as the paper feeding adjustment value.

NOTE: Designation of pigment/dye depends on ink type setting (NPD setting/IK).

„System table

This table is not used during printing. The manufacture setting value is stored to use as backup for user table.

Product Description Operating Panel 84