Epson 7600, 9600 service manual Indications on the Panel, LED Indications in Normal Mode

EPSON Stylus Pro 7600/9600 Revision A

1.4.2 Indications on the Panel

1.4.2.1 lED Indications in Normal Mode

† Operate

Table 1-22.

Displayed functions	Indicator status
While processing data, during power OFF sequence	Blink
Fatal error	Blink
Reset, timer IC reset/NVRAM clear	On
With power ON and in status other than those above	On
F/W updating completed	On

† Paper Out

		Table 1-23.
	Displayed functions			Indicator status
	Out of paper, end of roll			On
	Confusion of roll paper and sheet			On
	Paper set lever is released			On
	Paper is thick for cleaning			On
	Paper jam			Blink
	Paper cutting error			Blink
	Paper not straight			Blink
	Paper check error			Blink
	Paper (sheet) eject failure			Blink
	Fatal error			Blink
	Reset, timer IC reset/NVRAM clear			On
	Maintenance call		On for 100ms at intervals of 5 seconds
	F/W updating completed			On
† Pause		Table 1-24.
	Displayed functions			Indicator status
	Print ready			On

	Table 1-24.
Displayed functions		Indicator status
In SelecType mode		Off
During pause		Off
During ink drying time		Blink
During ink sequence		Blink
Other errors		Off
Fatal error		Blink
Reset, timer IC reset/NVRAM clear		On
Ink end (warning)		Blink
F/W updating completed		On
† Ink Out	Table 1-25.
Displayed functions		Indicator status
Out of corresponded ink		On
No cartridge for corresponded ink
Wrong cartridge for corresponded ink
Illegal cartridge for corresponded ink
Corresponded ink level low		Blink
Fatal error		Blink
Reset, timer IC reset/NVRAM clear		On
F/W updating completed		On
† Maintenance tank	Table 1-26.
Displayed functions		Indicator status
Maintenance tank full		On
No maintenance tank
Maintenance tank almost full warning		Blink
Fatal error		Blink
Reset, timer IC reset / NVRAM clear		On
F/W updating completed		On

Product Description Operating Panel 33