Epson 7600, 9600 No margin print setting, † No margin setting, Mode Operation, Cut Cuts

EPSON Stylus Pro 7600/9600 Revision A

1.4.3.11 No margin print setting

No margin print mode can be switched with these settings.

Following 3 modes can be selected;

	Table 1-31.
Mode	Operation
Left/right no margin (default)	Only right/left margin can be set to 0. Top/bottom margin is
	set with roll paper margin setting.
4 sides no margin / 1 cut	Left/right and top/bottom margin can be set to 0. Cutting
	methods are following;
	• After JOB is started, it cuts off the paper edge with the
	minimum margin during printing.
	• There is no margin between pages during JOB. It cuts off
	paper on the border of image.
	• After JOB is completed, it cuts off paper at the end of
	image.
4 sides no margin / 2 cuts	Left/right and top/bottom margin can be set to 0. Cutting
	methods are following;
	• After JOB is started, it cuts off the paper edge with the
	minimum margin during printing.
	• It cuts off paper at the end of image each page.
	• It cuts off paper after paper feeding with the minimum
	margin (*3).

*1. When 4 sides no margin / 2 cuts is selected, vertical length will be 2mm shorter than actual print size after cutting.

*2. When roll paper cutter OFF and page line print ON, page line is printed for each cutting position including page top cutting.

*3. We recommend 6cm for glossy paper, and 10cm for other papers.

†No margin setting

Table 1-32.

No margin mode	Right/left no margin			4 sides no margin		4 sides no margin
		No margin mode		(1 cut)		(2 cuts)
Printer operation
Driver setting	No margin print		No margin print		No margin print
			Auto cut		Auto cut
Panel setting	NO MARGIN L/R		NO MARGIN		NO MARGIN
(Printer setting menu)	ONLY		1 CUT		2 CUTS
Notes	Default		•	Uneven coloring	•	Uneven coloring
				may occur for some		may occur for some
				image, because top		image, because top
				edge is cut with		edge is cut with
				print interruption.		print interruption.
			•	Continuous data	•	The top/bottom is
				may be left slightly		cut inside of border
				on the top/bottom		to prevent margin
				because of cutter		from leaving on
				position gap.		paper. Vertical
						length will be 2mm
						shorter than actual
						print size after
						cutting.

Product Description Operating Panel 43