Epson 9600, 7600 service manual Menu Transition for Top & Bottom Adjustment

EPSON Stylus Pro 7600/9600

5.2.3.8 Top & Bottom Adjustment

Conduct printing and paper cutting and input the distances between the Front Sensor and the Head, between the Cutter and the Head and between the Edge Sensor 0 and the Head (printing start position) to adjust the top, bottom and side margins.

Revision A

Printing Pattern

„Press the [Pause] key on the compensation value input screen, and the display will change to “Top and Button”.

„Press the [Enter} key on the input screen for “Top Length” or “Bottom Length”, and the display will change to the input screen for “Bottom Length” or “Side Margin”, respectively.

„Press the [Enter] key on the input screen for “Side Margin”, and the display will change to “Rear Sensor Position”.

†Correction pattern of distances between the Front Sensor and the Head, between the Cutter and the Head

Top Length :

?3.0mm

[SelecType] [Enter]

Bottom Length :

?14.0mm

[SelecType]	[Enter]
Side Margin:
?		3.0mm
[SelecType]	[Enter]

[Paper Feed ∆]Key: +

[Paper Feed ∇]Key : –

* Setting is possible in increments of 0.1 mm.

[Paper Feed ∆]Key: +

[Paper Feed ∇]Key : –

* Setting is possible in increments of 0.1 mm.

[Paper Feed ∆]Key: +

[Paper Feed ∇]Key : –

* Setting is possible in increments of 0.1 mm.

„	Adjustment items:	Top margin (Front Sensor position)
		Bottom margin (cutter position)
		Side margin (printing start position)
„	Printing method:	Black 1 pass, Uni-D mode 180 dpi
„	Pattern drawing method:	Printing direction:	Uni-D
		Resolution:	360dpi
		Printing speed:	240CPS
		Dot:	NormalDot2

Figure 5-34. Menu Transition for Top & Bottom Adjustment

Bottom margin (14.0mm)			PaperFeed	Direction
		margin
Top margin (3.0mm)	Side
	(3.0mm)

Figure 5-35. Print Pattern for Top & Bottom Adjustment

Adjustment Self-diagnostic Function 242