Epson 9600, 7600 service manual Disassembly & Assembly Summary 154

EPSON Stylus Pro 7600/9600 Revision A

CAUTION

„In reassembly, place the wiring of electric parts in specified positions. (If wiring is located in places other than specified, cables can come in contact with a sharp edge or the anti-noise margin may lessen.)

„As necessary, if you remove each cover and operate the printer, care should be taken not to get injured by the operation of the drive system units.

„The cutter blade is extremely sharp, so care should be taken not to injure yourself when handling it.

„An ultra-hardened blade is used for the cutter blade, and physically, it is extremely brittle material, so care should be taken not to bump it against any of the metal parts of the printer, etc. and damage it.

„When performing service operations on items which are controlled as after service parts but which no procedures have been provided for, the state of the parts should be observed closely before beginning the operation to get a thorough idea of how to proceed.

„If you have to loosen a screw that has blue screw-lock applied to its head, make sure you apply blue screw-lock again when reassembling.

Top

L

Front

Bottom

Figure 4-1. Directional View of the Printer

Rear

R

Disassembly & Assembly Summary 154