Epson 9600, 7600 Head Slant Checking, Check the print result to see if the head is slanting

EPSON Stylus Pro 7600/9600 Revision A

5.2.3.12 Head Slant Checking

Check the print result to see if the head is slanting.

If there is a slant, make the “Head Slant Adjustment (Mechanical Adjustment)” (p.247).

†Slant Check Pattern

„Check Item: Head slant

„Pattern drawing method: 360dpi, Uni-D, 240CPS, VSD2, small

†Adjustment Resolution: 12∝m or less

Check these joint points for head slant

3mm 3mm

†Adjustment Range: 38 steps

[Enter] Adjust Print

[Enter]

Printing Pattern

Printing end

	Slant Check End
[Paper				Feed ∆]
	Feed ∇]		[Paper
	Output	Pattern
[Paper				Feed ∆]
	Feed ∇]		[Paper

[Enter] Key →To “Bi-d” [Pause] Key →To “Head Slant”

[Enter] Key → Pattern output [Pause] Key →To “Head Slant”

3mm

Figure 5-43. Slant Check Pattern

Figure 5-42. Menu Transition of Head Slant

Figure 5-44. Head Slant Check Printout

Adjustment Self-diagnostic Function 246