Epson 7600, 9600 service manual Menu Transition for Test Pattern Printing

EPSON Stylus Pro 7600/9600 Revision A

5.2.3.19 Test Pattern Printing

You can print adjustment patterns and check each adjustment item. (See Figure 5-56)

†Check Ptn.:

Prints all the adjustment patterns (including the adjustment variables list) (Time required: about 20 minutes)

†Check Ptn. 2:

Of the patterns to be output by “Check Ptn.”, the first pattern to the head gap adjustment (Uni-D) pattern will be output.

(Time required: about 5 minutes)

†Check Ptn. 3:

Of the patterns to be output by “Check Ptn.”, the Bi-D adjustment pattern to the adjustment variables will be output.

(Time required: about 15 minutes)

Adj. Variable:

Outputs the list of the setting compensation values (variables) determined by various adjustments.

„Press the [Cleaning] key on a serial number input screen, and the display will change to the next screen.

(For example, from “No.1: PEG**000000”, the display changes to “No.1: PEG**000000”.)

„Press the [Cleaning] key on the “Print Adj.Pattern” screen, and the display will change to the serial number input screen “No.1: PEG**000000”.

				[SelecType] Key → To "Printing Pattern"
Print :
				Printing end→	To serial number input screen
?		Check Ptn. ?
	[Paper Feed ∆]		[Paper Feed ∇]
				[SelecType] Key → To "Printing Pattern"
Print :
				Printing end→	To serial number input screen
?		Check Ptn. 2 ?
	[Paper Feed ∆]		[Paper Feed ∇]
				[SelecType] Key → To "Printing Pattern"
Print :
				Printing end→	To serial number input screen
?		Check Ptn. 3 ?
	[Paper Feed ∆]		[Paper Feed ∇]
Print :
?		Adj.Variable ?
		[SelecType]		[Paper Feed ∆]Key: +
No.1 :
				[Paper Feed ∇]Key : –

?PEG∗∗ 000000 * Setting is possible in increments of 2 digits.

	[Enter]	[Paper Feed ∆]Key: +
No.2 :		[Paper Feed ∇]Key : –
?	PEG01∗∗0000	* Setting is possible in increments of 2 digits.
	[Enter]	[Paper Feed ∆]Key: +
No.3 :		[Paper Feed ∇]Key : –
?	PEG0123∗∗ 00	*2Setting is possible in increments of 2 digits.
	[Enter]	[Paper Feed ∆]Key: +
No.4 :		[Paper Feed ∇]Key : –
?	PEG012345∗∗	* Setting is possible in increments of 2 digits.
	[Enter]
[Enter]	Adjust Print
	[Enter]
Print Adj.Pattern
	[Enter]	After printing, the display changes to
Printing Pattern
		[Clean Head].

Figure 5-56. Menu Transition for Test Pattern Printing

Adjustment Self-diagnostic Function 255