Epson 9600, 7600 service manual Maintenance Mode

EPSON Stylus Pro 7600/9600 Revision A

„<mm> indicates conversion value of <nn> designated with mechanism sequence command

•Conversion tables are XX1 ~ XX2.

•When <mm> = FFh, applicable input value is not converted.

„Operation

•The cursor shifts between <nn> and <mm> with SelecType button and Paper Source button.

•The value pointed with the cursor increases/decreases with Paper Feed ∆∇ buttons.

•Setting value is saved into NVRAM with “Enter” button.

†Paper feed adjustment offset

Offset value is set to add to the actual paper feed adjustment value. The setup value is always valid regardless of mechanism sequence command “Paper feed adjustment mode” setting.

„Format

“XX0=<nn>” Bias value is set for pigment.

„Operation

•The value increases/decreases with Paper Feed ∆∇ buttons.

•Setting value is saved into NVRAM with Enter button.

†System table version

It displays version No. of paper feed adjustment conversion table saved in the printer.

Format:

“XXS=<mmmmm><n>”

NOTE 1: <mmmmm> is 5 letters indicating version of engine controller. (e.g. “0270C”)

2:<n> is 1-figure hexadecimal number indicating change history of conversion table. (e.g.”0”)

†User table version

When a user change the table, the version No. is added 1 optionally. Format:

“XXU=nn” *<nn> is 2-figure hexadecimal number

†User table initializing

Users can initialize user table to system table with this mode.

1.4.5 Maintenance Mode 2

OUTLINE

†Startup

The maintenance mode 2 is selected by switching power ON while pushing the Paper source, Cut/Eject, and Paper Feed ∇ buttons.

†Operation

1.The setting menu select mode is selected after power ON.

2.Each setting menu is displayed one after another by pressing Paper Feed ∆∇ buttons in the setting menu select mode. It is shifted to setting item select menu by pressing the SelecType button.

[Setting menu] is displayed on the upper line, and [Setting item] is displayed on the lower line.

3.The setting menu is displayed one after another by pressing Paper Feed ∆∇ buttons in the setting item select mode. It is shifted to setting value select mode of the setting item by pressing the SelecType button. [Setting item] is displayed on the upper line, and [Setting value] is displayed on the lower line. The '*' represents the current setup value.

4.Setting value is displayed on the lower line one after another by pressing Paper Feed ∆∇ buttons in the setting value select mode if the setting value can be changed. The '*' represents the current setup value.

5.When the Enter button is pressed in the setting value select mode, the displayed setting value is entered as the current setting value. If it has a corresponded operation, it is started. No operation occurs if '*' is already displayed.

6.It returns to the setting item select menu by pressing the Paper Source button in the setting value select mode. It returns to the setting menu select mode by pressing the Paper Source button in the setting item select menu.

†Termination

Switch power OFF > ON.

†Panel display

Character strings on the second line in “Panel message translation” are displayed on the second line of LCD panel. Setup values are displayed on the second line of LCD panel.

Product Description Operating Panel 70