EPSON Stylus Pro 7600/9600

Revision A

5.2.3.11 Platen Position Checking

Check the adjusted position of each sponge on the platen.

„Make certain that the printed pattern agrees with the right and left positions of each sponge position.

„Pattern drawing method: 360dpi, Uni-D, 240CPS, VSD2, Large

[Enter] Adjust Print

[Enter]

Printing Pattern

Printing end

Platen Pos. R:

?0.0mm

[Enter]

Adj :

Cut Adj.

[Paper Feed ]Key: +

[Paper Feed ]Key : –

*Setting is possible in increments of 0.1 mm.

Figure 5-40. Menu Transition for Platen Position Checking

Figure 5-41. Print Pattern for Platen Position Checking

Adjustment

Self-diagnostic Function

245

Page 245
Image 245
Epson 7600, 9600 service manual Menu Transition for Platen Position Checking