Epson 7600 Cutter Solenoid Assy or Paper Guide L Adjustment, Damper Assy Adjustment, Battery

EPSON Stylus Pro 7600/9600 Revision A

5.1.4.11 Cutter Solenoid ASSY or Paper Guide L Adjustment

Described below are the adjustment items to be made once the Cutter Solenoid (p.177) has been replaced or the Paper Guide L has been reinstalled.

†Adjusting tools:

„Cutter Positioning Jig #F800

„Scale 1000mm #F713

„Scale Stopper #F714

†Adjustment items (steps):

Table 5-13. Required Adjustment Items

Step	Adjustment Item	See
	<Mechanism Adjustment>
1	Cutter Positioning Adjustment	p.269
2	Checking for Proper Cutting and Cutter Position	p.271
	<Start the Self-diagnostic Function>	p.220
	(Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject]
	→ Power ON)
3	Checking for Proper Cutting Pressure
4	Feed Correction + T&B Adjustment	p.239

5.1.4.12 Damper ASSY Adjustment

Described below are the adjustment items to be made once the Damper ASSY (p.173) has been replaced.

CHECK	„ Execute ink discharge (“Ink Blowing”) before removing the
POINT	Damper ASSY.
	Refer to “5.2.3.20 Clean Head (p.256)”.

„Secure the coupling screw and the ink tube by tightening at the specified torque. (2 ∼ 2.5 kg/f)

†Adjustment items (steps):

Table 5-14. Required Adjustment Items (Damper ASSY)

Step	Adjustment Item	See
	<Start the Self-diagnostic Function>	p.220
	(Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject]
	→ Power ON)
1	Including initial filling	p.259
2	Head Nozzle Checking (Cleaning)	p.237
3	Leak check pattern printing	p.259
4	Test Pattern Printing	p.255

5.1.4.13 Release Sensor (I/H Lever) Adjustment

No adjustment is required

5.1.4.14 Battery

No adjustment is required. Execute “Initialize RTC (p.83)”.

Adjustment Overview 217