Epson 7600, 9600 GAP Adjustment Print Pattern TBD, „ Each adjustment item, Adjustment Item List

EPSON Stylus Pro 7600/9600 Revision A

GAP ADJUSTMENT PRINT PATTERN (TBD)

†Print specifications

Print specifications of gap adjustment print pattern

Adjusting items	3 items (Refer to next clause for details)
Adjustment pattern height	Bi-D Black (#1, #2, #3) 90mm
	Bi-D All (#1, #2, #3) 220mm
	Uni-D All (#1, #2, #3) 145mm
Adjustment pattern width	Bi-D Black 65mm (24” 3set, 44” 5set)
	Bi-D All 190mm (24” 3set, 44” 5set)
	Uni-D All 185mm (24” 3set, 44” 5set)
Others	When it prints from paper edge, it feeds 100mm for roll paper,
	50mm for sheet, and starts printing.

„Each adjustment item

Table 1-45. Adjustment Item List

Adjusting item				Parameter
			Dot size	Head speed (CPS)	Nozzle No.
		K1	VSD1	240	1
		K2	VSD1	240	2
		C	VSD1	240	3
	#1
		M	VSD1	240	4
		LC	VSD1	240	5
		LM	VSD1	240	6
		Y	VSD1	240	7
		K1	VSD2	240	1
		K2	VSD2	240	2
		C	VSD2	240	3
Bi-D All	#2	M	VSD2	240	4
		LC	VSD2	240	5
		LM	VSD2	240	6
		Y	VSD2	240	7
		K1	VSD4	190	1
		K2	VSD4	190	2
		C	VSD4	190	3
	#3
		M	VSD4	190	4
		LC	VSD4	190	5
		LM	VSD4	190	6
		Y	VSD4	190	7

Table 1-45. Adjustment Item List (continued)

Adjusting item				Parameter
			Dot size	Head speed (CPS)	Nozzle No.
		K2	VSD1	240	2
		C	VSD1	240	3
	#1	M	VSD1	240	4
		LC	VSD1	240	5
		LM	VSD1	240	6
		Y	VSD1	240	7
		K2	VSD2	240	2
		C	VSD2	240	3
Uni-D All*1	#2	M	VSD2	240	4
		LC	VSD2	240	5
		LM	VSD2	240	6
		Y	VSD2	240	7
		K2	VSD4	190	2
		C	VSD4	190	3
	#3	M	VSD4	190	4
		LC	VSD4	190	5
		LM	VSD4	190	6
		Y	VSD4	190	7
	#1	K1	VSD1	240	1
Bi-D Black	#2	K1	VSD2	240	1
	#3	K1	VSD4	190	1

Note *1: For Uni-D All (between-row compensation), make each adjustment with the K1 row as the reference.

„The adjustment pattern printing method for each adjustment item is as follows:

Print direction	Bar: Going back and forth every 4dot
	Block: Upper patterns: Leftward Lower patterns: Rightward
Pattern interval	Upper patterns: equal interval
	Lower patterns:Print No.5 to be always current setup value. No.5
	is standard, and others have adjustment gap as
	following;

„The relationship between print pattern and adjustment gap is shown below.

Print pattern number	1	2	3	4	5	6	7	8	9
Adjustment gap N/1440 inch	-4	-3	-2	-1	0	+1	+2	+3	+4
(VSD1, VSD2, VSD4)

Product Description Operating Panel 63