RIM800 Relay Interface Module Manual | Technical Specifications & Wiring Guide

Document: LT0273	MX4428 MXP Engineering / Technical Manual
	Device Information and Programming

3.21RIM800 RELAY INTERFACE MODULE

3.21.1GENERAL

The RIM800 Relay Interface Module is suitable for relay outputs which require clean voltage free contacts and no supervision. For example it can be used to signal states to other systems (e.g. BMS or security systems), or to energise loads that do not need to be supervised, e.g. Door Holders.

3.21.2RIM800 SPECIFICATIONS

Dimensions:	Height: 61mm Width: 84mm Depth: 25mm
Weight	100g
Line Connections	L-, L+
Supply Voltage	20V – 40V
Supply Current	Standby Current : 285uA (typical)
	LED on : 2.8mA (typical)
Contact Rating	2A 30Vdc
	0.6A 120Vac (not permitted by AS / NZS standards)
	0.3A 240Vac (not permitted by AS / NZS standards)

3.21.3RIM800 FIELD WIRING

The field wiring is shown in Figure 3.7.

	PSU
	Normally
	DeEnergised
	Load
ANALOG LOOP
PREVIOUS	NEXT
DEVICE	DEVICE
TB1	TB2

L+ L- L+ L- O+ O- N/O COM N/C

RIM800 RELAY MODULE

Normally

Energised

Load

Make no connection to O+ and O- terminals

Figure 3.7 RIM800 Field Wiring

Issue 1.5

24 March 2006

Page 3-43

MX4428 specifications

The Tyco MX4428 is a cutting-edge device known for its robust performance in the realm of wireless communication and sensor acquisition. Tailored for applications in various sectors, the MX4428 is particularly well-suited for industrial automation, environmental monitoring, and smart city initiatives. With its advanced features, the device has gained tremendous popularity among engineers and developers looking for reliability and efficiency in data transmission.

One of the standout features of the MX4428 is its exceptional range, which can extend up to several kilometers under optimal conditions. This long-range capability ensures that data can be transmitted over vast distances without degradation in quality, making it ideal for remote monitoring applications. Additionally, the device operates on multiple frequency bands, providing flexibility in deployment based on specific regional requirements and regulatory guidelines.

The MX4428 utilizes a highly efficient radio protocol that enhances data throughput while reducing power consumption. This asymmetric data transmission method allows for low-duty cycle operation, extending battery life and autonomy. The device's energy efficiency is particularly beneficial in applications where frequent battery replacement would be impractical, such as in environmental sensors and agricultural monitoring systems.

Furthermore, the MX4428 is equipped with comprehensive sensor integration capabilities. It can seamlessly interface with various sensors, making it a versatile choice for collecting a wide range of data types. From temperature and humidity sensors to motion detectors, the MX4428 can serve as a central hub for data gathering and transmission, providing real-time insights into environmental conditions.

Security is also a paramount consideration in the design of the MX4428. It incorporates robust encryption and authentication protocols to safeguard data integrity during transmission. This feature is crucial for applications involving sensitive information or those that require compliance with strict regulatory frameworks.

In summary, the Tyco MX4428 is a powerful and versatile device that boasts a combination of long-range communication, low power consumption, and comprehensive sensor integration capabilities. Its robust security features further enhance its appeal for critical applications across various industries. Whether for industrial, environmental, or smart city use cases, the MX4428 stands out as a reliable solution that meets the demands of modern wireless communication landscapes.

Tyco RIM800 Relay Interface Module Manual: Specifications and Programming Guide

Models: MX4428