Document: LT0273

MX4428 MXP Engineering / Technical Manual

 

Device Information and Programming

3.19 FP0838 / FP0839 MANUAL CALL POINTS

3.19.1GENERAL

The FP0838 and FP0839 Manual Call Points consist of a MIM801 mounted on an 1841 Break Glass Switch assembly. They are designed for normally closed contacts as is required in New Zealand.

The normal response time to an input change of state is 0 – 5 seconds, as each device is polled at 5 second intervals by the MXP. As faster operation is required in New Zealand, interrupt operation should be enabled for the MIM801. Interrupt operation allows a change to be signalled by the device so that the MXP detects the change immediately, rather than waiting for the next poll of the device. Default programming of the MIM801 selects open circuit alarm and interrupt operation.

The FP0838 and FP0839 Call Points include a LED visible from the front. This lights on alarm and can be programmed to blink when the MIM801 is polled. Operation is otherwise as for the MIM801.

3.19.2MX4428 PROGRAMMING OPTIONS - FP0838 / FP0839

These Call Points are programmed as MIM801s. Refer to section 3.16.5.

Issue 1.5

24 March 2006

Page 3-39

Page 54 Page 56
Page 55
Image 55
Tyco technical manual 19 FP0838 / FP0839 Manual Call Points, 19.2 MX4428 Programming Options FP0838 / FP0839
Page 54 Page 56

MX4428 specifications

The Tyco MX4428 is a cutting-edge device known for its robust performance in the realm of wireless communication and sensor acquisition. Tailored for applications in various sectors, the MX4428 is particularly well-suited for industrial automation, environmental monitoring, and smart city initiatives. With its advanced features, the device has gained tremendous popularity among engineers and developers looking for reliability and efficiency in data transmission.

One of the standout features of the MX4428 is its exceptional range, which can extend up to several kilometers under optimal conditions. This long-range capability ensures that data can be transmitted over vast distances without degradation in quality, making it ideal for remote monitoring applications. Additionally, the device operates on multiple frequency bands, providing flexibility in deployment based on specific regional requirements and regulatory guidelines.

The MX4428 utilizes a highly efficient radio protocol that enhances data throughput while reducing power consumption. This asymmetric data transmission method allows for low-duty cycle operation, extending battery life and autonomy. The device's energy efficiency is particularly beneficial in applications where frequent battery replacement would be impractical, such as in environmental sensors and agricultural monitoring systems.

Furthermore, the MX4428 is equipped with comprehensive sensor integration capabilities. It can seamlessly interface with various sensors, making it a versatile choice for collecting a wide range of data types. From temperature and humidity sensors to motion detectors, the MX4428 can serve as a central hub for data gathering and transmission, providing real-time insights into environmental conditions.

Security is also a paramount consideration in the design of the MX4428. It incorporates robust encryption and authentication protocols to safeguard data integrity during transmission. This feature is crucial for applications involving sensitive information or those that require compliance with strict regulatory frameworks.

In summary, the Tyco MX4428 is a powerful and versatile device that boasts a combination of long-range communication, low power consumption, and comprehensive sensor integration capabilities. Its robust security features further enhance its appeal for critical applications across various industries. Whether for industrial, environmental, or smart city use cases, the MX4428 stands out as a reliable solution that meets the demands of modern wireless communication landscapes.
Top Page Image Contents