Tyco MX4428 technical manual Compatible Device Summary, Device Function

MX4428 MXP Engineering / Technical Manual	Document: LT0273
Device Information and Programming

All loop devices are rated at a loop voltage of 20Vdc - 40Vdc and a signalling voltage of 2V p-p – 6V p-p. Alarm Currents specified do not include remote indicators. Add 7mA for each remote indicator.

DEVICE		FUNCTION	Comments
814I		Ionisation Smoke Detector	Requires base
814H		Heat Detector	Requires base
814PH		Photo Smoke + Heat	Requires base
		Detector
814P		Photo Smoke Detector	Requires base
814CH		CO + Heat Detector	Requires base
MIM800		Mini Input Module	EOL 200Ω
			Alarm R (if used) 100Ω
			Max Wiring R 10Ω
		Mini Input Module	N/O mode - as MIM800
MIM801		(normally closed interrupt)	N/C -
			EOL 200Ω
			Max wiring R 50Ω
CIM800		Contact Input Module	EOL 200Ω
			Alarm R (if used) 100Ω
			Max Wiring R 10Ω
DIM800		(Conventional) Detector	EOL 4k7
		Interface Monitor	Requires separate supply.
CP820		Call Point
FP0838, FP0839		NZ Call Point
RIM800		Relay Interface Module	2A 30Vdc
		Sounder Notification	2A 30Vdc.
SNM800		Module (Supervised relay	Requires external supply.
		output)
LPS800		Loop Powered Sounder	Provides 24V at up to 75mA
		Module
MUB		Standard Base
5BI		Isolator Base
814SB		Loop Powered Sounder	Selectable tone (not AS2220 or ISO8201)
		Base	Adjustable sound level
		Loop Powered Sounder	Selectable tone (Including AS2220 and ISO
	802SB	Base	8201 Evacuation tone)
			Adjustable sound level
	812SB	Loop Powered Sounder	Selectable tone (Including AS2220 and ISO
MkII		Base	8201 Evacuation tone)
		Externally Powered	Selectable tone (Including AS2220 and ISO
Sounder
		Sounder Base	8201 Evacuation tone)
Bases	901SB
			Adjustable Sound Level.
			Requires external 24V
		Externally Powered	Selectable tone (Including AS2220 and ISO
	912SB	Sounder Base	8201 Evacuation tone)
			Requires external 24V
814RB		Relay Base	1A 30Vdc
			2 pole changeover
VLC800		Vesda aspirating smoke	Requires external supply. Requires PC to
		detector	set up.

Table 3-1 Compatible Device Summary

The MXP will allow some alternative devices to be used without generating a fault, where the inserted device can provide all the features of the configured device. This includes an 814PH or 814CH used where an 814H was programmed, a CIM800 used where a MIM800 was programmed, and an 814PH used where an 814P was programmed.

Page 3-6 24 March 2006 Issue 1.5