Epson 9600, 7600 PG Setting Values, Paper thickness Panel SN command Actual PG, Command

EPSON Stylus Pro 7600/9600 Revision A

1.4.3.3 PG Setting

Selecting this mode allows the user to set the platen gap. The relationship between panel setting, command setting (SN command), and actual platen gap position is shown below.

Table 1-29. PG Setting Values

Paper thickness	PH	Panel	SN command	Actual PG	Note
sensor	command			position
Less than 0.3mm	00H	Narrow	-	Minimum	*1
		Standard		Minimum	*1
		Wide		Small
		Wider		Middle
	01H-06H	Narrow	Minimum	Minimum
			Small	Minimum
			Middle	Small
			Big	Middle
		Standard	Minimum	Minimum
			Small	Small
			Middle	Middle
			Big	Big
		Wide	Minimum	Small
			Small	Middle
			Middle	Big
			Big	Big
		Wider	Minimum	Middle
			Small	Big
			Middle	Big
			Big	Big
	07H-12H	-	-	Big

Table 1-29. PG Setting Values (continued)

Paper thickness	PH	Panel	SN command	Actual PG	Note
sensor	command			position
More than 0.3mm	00H-06H	Narrow	Minimum	Small
Less than 0.7mm
			Small	Small
			Middle	Small
			Big	Middle
		Standard	Minimum	Small
			Small	Small
			Middle	Middle
			Big	Big
		Wide	Minimum	Small
			Small	Middle
			Middle	Big
			Big	Big
		Wider	Minimum	Middle
			Small	Big
			Middle	Big
			Big	Big
	07H-12H	-	-	Big
More than 0.7mm	-	-	-	Big

Note 1: Only in this case, SN command is ignored. When paper thickness is 0.15mm, it is operated with minimum Bi-D value and minimum SN(PG).

2:When “Wide” or “Wider” is set, “W” is displayed on the left side of LCD lower line.

3:When “Narrow” is set, “N” is displayed on the left side of LCD lower line.

Product Description Operating Panel 40