Epson 9600, 7600 service manual Write D/A Value

EPSON Stylus Pro 7600/9600 Revision A

† Pigment Code Input

† After ink filling, the display returns to the adjustment top menu.Pigment Code

Input

In this mode, input a pigment code by operating on the panel.

The cursor is displayed at the position where a digit is currently input.

„ Press [Cleaning] key to shift the cursor (pointing out the input item) to the

right.

„ The cursor moves to the left end when [Cleaning] key is pressed at the right

end.

„ After ink charge, the display returns to the adjustment top menu.

„ Press the [Pause] key to return to the previous level in the hierarchy.

In doing so, note that the input code is valid but it has not been registered yet.

„ The cursor skips the item displayed with “\”.

Pigment–1	[Paper Feed ∆] Key: +
266432F	[Paper Feed ∇] Key: –
Pigment–2	[Paper Feed ∆] Key: +
44WM2Q3	[Paper Feed ∇] Key: –
Pigment–3	[Paper Feed ∆] Key: +
QVVWUVR	[Paper Feed ∇] Key: –

„ At input for “Pigment-1” “Pigment-2” or “Pigment-3”, press the [Enter] key

to enter the input line selection mode, which is the immediately upper level in

the hierarchy.

5.2.3.4 Write D/A Value

Pigment–4

S01S0\\

[Enter]

Exc.EnterKey Fill

[Enter]

[Paper Feed ∆] Key: +

[Paper Feed ∇] Key: –

Press [Pause] key for transition to the adjustment top menu.

CAUTION Stylus Pro 7600/9600 does not incorporate this function. Do not try to execute this operation on the service site.

Please Set Ink Displayed when the cartridge has not been installed.

[Enter]

INK CHARGING

Figure 5-26. Menu Transition of Code Input

Adjustment Self-diagnostic Function 236