Epson 7600, 9600 service manual Releasing the Crhp Sensor Assy Harness

EPSON Stylus Pro 7600/9600 Revision A

4.3.9 CR_HP Sensor ASSY

CAUTION When unlocking the carriage, do not move the carriage by about 2 cm or more with the cutter pushed into the innermost position;

otherwise, the cutter edge would be damaged.

1.Remove the R Side Cover. (p.160)

2.While pushing the cutter area gently, shift the carriage to the left about 2 cm to unlock the carriage and then move the carriage to the left from the capping position.

(See Figure 4-24)

3.Release the harness of the CR_HP Sensor ASSY from the four clamps on the printer body. (See Figure 4-46)

4.Pinch the two upper hooks of the CR_HP Sensor ASSY and disengage them from the holding plate, and disconnect the connector. (See Figure 4-47)

Clamp

Clamp

Clamp

Figure 4-46. Releasing the CR_HP Sensor ASSY Harness

Hook

CR_HP Sensor ASSY

	Figure 4-47. Removing the CR_HP Sensor
Disassembly & Assembly	Disassembly and Assembly of Carriage (CR) Mechanism	183