Epson 7600, 9600 service manual Pedge Sensor Assy Adjustment, Prear Sensor Assy Adjustment

EPSON Stylus Pro 7600/9600 Revision A

5.1.4.5 P_EDGE Sensor ASSY Adjustment

Described below are the adjustment items to be made once the P_EGDE Sensor ASSY (p.179) has been replaced.

†Adjusting tools:

„ A3Tracing Paper #F751(Microtrace #300 LMB)

„A3 copying paper (PPC)

„Scale 1000mm #F713

„Scale Stopper #F714

†Adjustment items (steps):

Table 5-7. Required Adjustment Items

Step	Adjustment Item	See
	<Start the Self-diagnostic Function>	p.220
	(Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject]
	→ Power ON)
1	P_Edge Sensor AD Adjustment	p.232
2	Feed Correction + T&B Adjustment	p.239

5.1.4.6 P_REAR Sensor ASSY Adjustment

Described below are the adjustment items to be made once the P_REAR Sensor ASSY (p.191) has been replaced.

†Adjusting tools:

„ A3Tracing Paper #F751(Microtrace #300 LMB)

†Adjustment items (steps):

Table 5-8. Required Adjustment Items

Step	Adjustment Item	See
	<Start the Self-diagnostic Function>	p.220
	(Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject]
	→ Power ON)
1	P_Rear Sensor AD Adjustment	p.231
2	Rear Sensor Position Adjustment	p.243

5.1.4.7 P_THICK/P_THICK_0.3 Sensor ASSY Adjustment

Described below are the adjustment items to be made once the P_THICK Sensor/ P_THICK Sensor_0.3 ASSY (p.190) has been replaced.

†Adjusting tools:

„ Thickness gauge (0.3/ 0.4, 0.8/ 0.9mm)

†Adjustment items (steps):

Table 5-9. Required Adjustment Items

Step	Adjustment Item	See
	<Start the Self-diagnostic Function>	p.220
	(Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject]
	→ Power ON)
1	Testing will be executed by “Sensor” (Test menu) → “Paper”	p.224

5.1.4.8 CR Encoder Sensor ASSY Adjustment

Described below are the adjustment items to be made once the CR Encoder Sensor ASSY (p.178) has been replaced.

†Adjusting tools:

„ CR ENC sensor positioning jig #F799

†Adjustment items (steps):

Table 5-10. Required Adjustment Items

Step	Adjustment Item	See
	<Mechanism Adjustment>
1	CR Encoder Sensor Mounting Position Adjustment	p.268

Adjustment Overview 215