Epson 9600, 7600 service manual Adjustment, Panel Setting Item List

EPSON Stylus Pro 7600/9600 Revision A

5.2.3 Adjustment

Make the mechanism adjustment (head slant) and the firmware parameter adjustment.

Table 5-19. Panel Setting Item List

Item	Description	See
Rear AD Adjustment	Make the AD adjustment of the rear sensor.	p.231
Edge AD Adjustment	Make the AD adjustment of the edge sensor.	p.232
Front AD Adjustment	(Not used)	–
Head Rank Input	Input the characteristic values for the installed head.	p.233
	After that, supply ink.

Table 5-19. Panel Setting Item List (continued)

Item	Description	See
Test Pattern Printing	Head nozzle checking and adjustment pattern (Input	p.255
	the serial number)
Clean Head	Clean the tube and head using cleaning liquid.	p.256
Counter Clear	Clear various software counters.	p.257

Adj :		[SelecType]
		[Enter] Start
?	Rear AD ?	[Pause] or [Items]

D/A Compensation Value	(Not used)	p.236
Write
Head Nozzle Check	Check the print result for proper ink discharge from	p.237
	the head nozzles.
Paper Skew Check	Perform paper feed, and check the degree of skew by	p.238
	sensor.
Feed Correction + T&B	Make the printer perform printing and correct the	p.239
	paper feed rate (band feed).
Top & Bottom	Adjust the paper top and bottom margins and the left	p.242
	margin.
Automatic Mechanism	(Not used)	–
Adjustment
Rear Paper Sensor Position	Using cut paper, determine the distance between the	p.243
	XF sensor and the XR sensor.
Platen Position Adjustment	Adjust the sponge position of the platen.	p.244
Platen Position Checking	Check the adjustment result of the sponge position of	p.245
	the platen.
Cutter Adjustment	(Not used)	–
Slant Check	Make the printer perform printing and check the slant	p.246
	of the head. (Mechanism Adjustment)
Round Trip Print Position	Make the printer perform printing and adjust the	p.248
Adjustment (Bi-D)	round trip printing position. (PG/1.2mm)
Parameter Copying	Copy the Bi-D adjustment value (PG/1.2mm) above	p.251
(Bi-D)	onto Bi-D2 (PG=0.7mm) and Bi-D3 (PG=2.1mm).
Round Trip Print Position	Make the printer perform printing and adjust the	p.251
Adjustment 2 (Bi-D2)	round trip printing position. PG/0.7mm
Round Trip Print Position	Make the printer perform printing and adjust the	p.251
Adjustment 3 (Bi-D3)	round trip printing position. PG/2.1mm
Round Trip Print Position (Bi- According to the result of the round trip print position
D Adjustment) Checking	adjustment, shift the pattern by the theoretically	p.252
	required number of dots. Then print the pattern and
	make certain that the result of adjustment is proper.
Head Gap Adjustment	Make the printer perform printing and adjust the one-	p.253

Adj :
?	Edge AD ?
Adj :
?	Frnt AD ?
Adj :	*Not Used
?	Input Rank ?
Adj :
?	Write D/A Value ?
	*Not Used

Adj :

? Check Nozzle ?

Adj :
?	Check Skew ?
Adj :
?	Feed Adj.+T&B ?
Adj :
?	Top & Bottom ?
Adj :
?	AT MechaAdj. ?
Adj :	*Not Used
?	Rear Sensor Pos. ?
Adj :
?	Platen Pos. ?
Adj :
?	Platen Pos. Chk. ?

Press Enter after the last item

Adj :
?	Cut Adj ?
	*Not Used

Adj :

?Head Slant ?

Adj :

?Bi-d ?

Adj :

?CopyParam.

Adj :
?	Bi-d2 ?
Adj :
?	Bi-d3 ?
Adj :
?	Bi-d Chk. ?

Adj :

?Head LR Adj.

Adj :
?	Test Print ?
Adj :
?	Clean Head ?
Adj :
?	Counter Clear ?

(Uni-D Adjustment) way printing position.

Figure 5-17. Adjustment Menu Transition

Adjustment Self-diagnostic Function 230