Epson 7600, 9600 service manual H Top Cover Removal on left side

EPSON Stylus Pro 7600/9600 Revision A

4.2.5 H Top Cover

1.Remove the R Side Cover. (p.160)

2.Remove the L Side Cover. (p.163)

3.Remove the I/H Cover. (p.164)

4.Open the Front Cover.

5.From the left side, remove one screw (CUPS: M4⋅8). (See Figure 4-14)

6.Remove the screw (CUPS: M4⋅8) at the front left of the printer.

7.Remove the screw (CUPS: M4⋅8) at the front right of the printer.

8.From the right side, remove one screw (CUPS: M4⋅8). (See Figure 4-15)

9.To avoid damaging the P_THICK Sensor or P_THICK_0.3 Sensor, bring down the Paper Set Lever toward you (to the paper holding position).

10.Pull up the H Top Cover rearward and remove it.

In doing so, take care not to lose the plate which is also locked with the front left screw.

CAUTION When removing the H Top Cover, care should be taken not to damage the P_THICK Sensor and P_THICK Sensor_0.3. To avoid

damaging them, bring down the Paper Set Lever toward you (to the paper holding position) first and shift the H Top Cover rearward in

an oblique direction for its removal.

Screws (CUPS: M4⋅8) ⋅2

Screw (CUPS: M4⋅8)

Figure 4-14. H Top Cover Removal on left side

Screw (CUPS: M4⋅8)

Screw (CUPS: M4⋅8)

Plate

Figure 4-15. H Top Cover Removal on right side

Disassembly & Assembly Removing the Panel Unit and Housing 165