Epson 9600, 7600 service manual Cover Sensor Assy Adjustment, PF Encoder Sensor Assy Adjustment

EPSON Stylus Pro 7600/9600 Revision A

5.1.4.9 Cover Sensor ASSY Adjustment

Described below are the adjustment items to be made once the Cover Sensor ASSY (p.197) has been replaced.

†Adjustment items (steps):

Table 5-11. Required Adjustment Items

Step	Adjustment Item	See
	<Mechanism Adjustment>
1	Sensor position adjustment *	p.267
	<Start the Self-diagnostic Function>	p.220
	(Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject]
	→ Power ON)
2	Testing will be executed by "Sensor" (Test menu) → “Cover”	p.224

Note "*": The gap is acceptable, if it does not permit entrance of your finger when the Front Cover is opened and “COVER OPEN” is displayed.

5.1.4.10 PF Encoder Sensor ASSY Adjustment

Described below are the adjustment items to be made once the PF Encoder Sensor ASSY (p.186) has been replaced.

†Adjusting tools:

„PF ENC sensor positioning tool #F764

„Cutter Positioning Jig #F800

„Scale 1000mm #F713

„Scale Stopper #F714

†Adjustment items (steps):

Table 5-12. Required Adjustment Items

Step	Adjustment Item	See
	<Mechanism Adjustment>
1	PF ENC Installation Position Adjustment	p.272
	<Start the Self-diagnostic Function>	p.220
	(Power OFF → [Paper Feed ∆]+[Paper Feed ∇]+[Cut/Eject]
	→ Power ON)
2	Feed Correction + T&B Adjustment	p.239
3	Rear Sensor Position Adjustment	p.243

Adjustment Overview 216