Epson 7600, 9600 Mechanism Specifications, Printable Area, Roll paper Model Dimension Sheet

EPSON Stylus Pro 7600/9600 Revision A

1.2.6 Mechanism Specifications

1.2.6.1 Printable Area

Table 1-15. Printable Area

Item	Roll paper	Model	Dimension
	/Sheet
PW	Roll paper	Stylus Pro 7600	203 mm ~ 610 mm
(Paper width)
		Stylus Pro 9600	203 mm ~ 1118 mm
	Sheet	Stylus Pro 7600	203 mm ~ 610 mm
		Stylus Pro 9600	203 mm ~ 1118 mm
PL	Roll paper	Stylus Pro 7600/Stylus Pro 9600	Max. 202m
(Paper length)
	Sheet	Stylus Pro 7600/Stylus Pro 9600	279 mm ~ 1580 mm
TM	Roll paper	Stylus Pro 7600/Stylus Pro 9600	3 mm/15 mm
(Top margin)
	Sheet	Stylus Pro 7600/Stylus Pro 9600	3 mm
BM	Roll paper	Stylus Pro 7600/Stylus Pro 9600	3 mm/15 mm
(Bottom margin)
	Sheet	Stylus Pro 7600/Stylus Pro 9600	14 mm
LM	Roll paper	Stylus Pro 7600/Stylus Pro 9600	0 mm/3 mm/15 mm
(Left margin)
	Sheet	Stylus Pro 7600/Stylus Pro 9600	0 mm/3 mm
RM	Roll paper	Stylus Pro 7600/Stylus Pro 9600	0 mm/3 mm/15 mm
(Right margin)
	Sheet	Stylus Pro 7600/Stylus Pro 9600	0 mm/3 mm

†The printer detects paper width when paper is set. (If paper width detection setting is OFF, it does not detect paper width.)

†It does not print the image beyond the detected paper width or the printable area specified by paper size setting.

(It may print on the platen if paper width detection setting is OFF.)

†Margins of roll paper can be changed on the panel as follows; Top/bottom 15 mm, left/right 3 mm Top/bottom/left/right 3 mm

Top/bottom/left/right 15 mm

NOTE: Under special conditions, it is possible to set right and left margin (LM, RM) to 0.

†For borderless print, right and left margins are 3mm each because skew detection limit is 3mm. If the distance from the paper edge to the platen (sponge width) is less than 3mm, the maximum surplus print quantity without ink discharge onto the platen (0mm~3mm) is printable area.

Paper Feed Direction
	Printable Area

Figure 1-1. Printable Area

Product Description Basic Specifications 21