EPSON Stylus Pro 7600/9600

Revision A

„Simplified detection sequence for left and right edges (skew check)

When the paper width detection function is turned off, left and right edge detection (skew check) is not carried out.

Error display:

1:Set the paper correctly

2:PAPER NOT STRAIGHT

CHECK

Transition to this sequence is allowed only at inter-page skew

POINT

checking (at cut/eject, etc.) At paper initial, transition to “Paper size

 

detection sequence (left and right edges)” (p.109) takes place.

 

Solid Line: Paper

 

Right edge

Broken Line: Printable

Left edge

Area

detection position

 

detection position

 

Previously determined

 

 

paper width X mm

 

a

Note "*1": Paper presence position = 215.4 mm Paper absence position = 132.9 mm LED turns off upon completion of skew check.

 

"*2": Printing area MIN position

Left and right edge

=142.9 mm –4.0 mm (Reserved width)

A4 size (210.0 mm) – 20.0 mm = 190.0

detection start

mm

CR moves to the paper presence position (100CPS).

Flashing during acceleration on Fl_Box

Moving to paper absence position. Threshold value is

calculated during moving to paper presence position. After determination of threshold value, edge sensor LED is kept on.

*1

CR moves to the position "printing area MIN position + A4

size - 20 mm = 328.9 mm" (350CPS) *2

While monitoring the edge sensor output, CR moves toward

the home to the printing area MIN position (350CPS).

Paper absence detected

 

No

 

 

 

?

Yes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

From the position where the sensor output has changed, CR

 

 

 

 

Edge sensor LED is turned off.

moves by 2 mm outward (240CPS).

 

 

 

 

 

 

 

 

Error 1

While monitoring the edge sensor output, CR moves toward

 

 

 

the home at 5 cps. The position where paper absence is

 

 

 

detected is judged to be the left edge position of the paper.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The paper width determined by the previously executed left

 

 

 

and right edge detection (at paper initial or skew check) is

 

 

 

added to the left edge position. The resultant position is

 

 

 

regarded as the paper right edge position.

 

 

 

 

 

 

 

 

 

 

 

 

Paper right edge

Yes

position deflected by 3 mm from previously

 

determined position?

 

No

 

Paper left edge

Yes

position deflected by 3 mm from previously

 

determined position?

 

No

 

Edge sensor LED is turned off.

 

Edge sensor LED is turned off.

Return

Error 2

Figure 2-9. Simplified Detection Sequence for Left and Right Edges

(Skew Check)

Operating Principles

Print Mechanism Components

111

Page 111
Image 111
Epson 7600, 9600 service manual Operating Principles Print Mechanism Components 111