Epson 9600, 7600 service manual Round Trip Print Position Bi-D Adjustment Checking

EPSON Stylus Pro 7600/9600 Revision A

5.2.3.17 Round Trip Print Position (Bi-D Adjustment) Checking

According to the result of the round trip print position adjustment, shift the pattern by the theoretically required number of dots. Then print the pattern and check the print result.

Check to see if the central patterns are in alignment and if not, perform the Bi-D adjustment again.

The menu transition for Bi-D adjustment checking and print patterns are shown at right.

NOTE: Figure 5-53shows the print patterns for PG1.2mm. The patterns for PG0.7mm and PG2.1mm will also be printed.

„Pattern drawing method: #1, #2 360dpi, Bi-D, 240CPS, VSD1, Large #8, #9 360dpi, Bi-D, 240CPS, VSD2, Large #15, #16 360dpi, Bi-D, 190CPS, VSD4, Large

[Enter] Adjust Print

[Enter]

Printing Pattern

Figure 5-52. Menu Transition for Bi-D Adjustment Checking

Figure 5-53. Print Patterns for Bi-D Adjustment Checking

Adjustment Self-diagnostic Function 252