SUPER MICRO Computer AS 1020C-3 Drive Bay Installation/Removal, Removing the Front Bezel

AS1020C-3 User's Manual

Figure 6-2. System Cooling Fans

4-cm fans Air shroud

6-4 Drive Bay Installation/Removal

Removing the Front Bezel

If your system has a front bezel (optional) attached to the chassis, you must fi rst remove it to gain access to the drive bays. To remove the bezel, fi rst unlock the front of the chassis then press the release knob (see Figure 6-3). Carefully re- move the bezel with both hands. A fi lter located within the bezel can be removed for replacement/cleaning. It is recommended that you keep a maintenance log of

filter cleaning/replacement, since its condition will affect the airfl ow throughout the whole system.

6-4