Chapter 5: Advanced Serverboard Setup
5-1
Chapter 5 Advanced Serverboard Setup
This chapter covers the steps required to i nstall processors and heatsinks to the
H8DCR-3 serverbo ard, connect the data and power cables and install add-on
cards. All serverboard j umpers and connections are described an d a layout and
quick reference chart are included in this chapter. Remember to close the chas-
sis completely when you have fi nished working on the serverboard to protect and
cool the system suffi ciently.

5-1 Handling the Serverboard

Static electrical discharge can damage electronic com ponents. To prevent dam-
age to printed circuit boards, it is important to handle them very carefully (see
Chapter 4). Also note that the size and weight of th e serverboard can cause
it to bend if handled improperly, which may result in damage. To prevent the
serverboard from bending, kee p one hand under the center of the board to sup-
port it when handling. The following measures are generally suffi cient to protect
your equipment from static discharge.

Precautions

• Use a grounded wrist strap design ed to prevent static discharge.
• Touch a grounded metal object before removing any board f rom its antistatic
bag.
• Handle a board by its e dges only; do not touch its comp onents, peripheral chips,
memory modules or gold contacts.
• When handling chips or modules, avoid to uching their pins.
• Put the server board, add-on cards and peripherals back into their antis tatic
bags when not in use.
Unpacking
The serverboard is shipped i n antistatic packaging to avoid static damage. Whe n
unpacking the board, make sure the person handling i t is static protected.