Reset Button
The Reset Button connection is lo- cated on pins 3 and 4 of JF1. Attach it to the hardware reset switch on the computer case. Refer to the table on the right for pin defi nitions.
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Mo- mentarily contacting both pins will power on/off the system. This button can also be confi gured to function as a suspend button (see the Power Button Mode setting in BIOS). To turn off the power when set to suspend mode, depress the button for at least 4 seconds. Refer to the table on the right for pin defi nitions.
Reset Button
Pin Definitions (JF1)
Pin# Defi nition
3Reset
4 Ground
Power Button
Pin Definitions (JF1)
Pin# Defi nition
1PW_ON
2Ground
LAN1/2 (Ethernet Ports)
Two Gigabit Ethernet ports (desig- nated LAN1 and LAN2) are located beside the COM1 port. These Ether- net ports accept RJ45 type cables.
Universal Serial Bus Ports (USB0/1)
Universal Serial Bus Ports Pin Definitions (USB0/1)
Two Universal Serial Bus ports (USB2.0) are located beside the key- board/mouse ports. See the table on the right for pin defi nitions.
USB0
Pin # Defi nition
1+5V
2PO-
3PO+
4Ground
USB1
Pin # Defi nition
1+5V
2PO-
3PO+
4Ground
