Pioneer AVIC-Z1 Correcting the installation angle, Checking the device and version, information

To clear values...

If you want to delete the learned results stored in [Distance], [Speed Pulse] or [Learning Sta- tus], touch the relevant result, then touch [Yes].

❒If you select [Learning Status], you can select [Reset All] or [Reset Distance Study]. To clear all learning statuses, touch [Reset All]. To clear only the Distance study, touch [Reset Distance Study].

❒Touch [Reset All] for the following cases:

•When you changed the installation position of the navigation system

•When you changed the installation angle of the navigation system

•When you moved the navigation system to another vehicle

❒When the distance accuracy is low, touch [Reset Distance Study].

❒Touching [Reset All] returns the installation angle setting also to the default or factory set- ting. Reconfigure the setting.

➲Correcting the installation angle ➞ Page 95

❒The navigation system can automatically use its sensor memory based on the outer dimen- sions of the tires.

Correcting the installation angle

You can correct the installation angle of the navi- gation system. Correcting the installation angle improves the accuracy of sensor learning, even if the unit is not facing center. Select the orienta- tion of the LCD panel from the left, center, and right.

1	Touch [Settings] in the navigation menu,
	then touch [Hardware].	NAVI
2	Touch [Installation Angle Setup].

3 Check the direction the LCD panel faces, and touch the corresponding item.

Left:
Select this when the angle is 5° or more to the
left from the center.
Center:
Select this when the angle is less than 5° to
the left, and less than 5° to the right from the	Chapter
center.
Right:
Select this when the angle is 5° or more to the
right from the center.	10
❒ If the [Learning Status] in the [3D Cali-	Modifying
bration Status] is [Simple hybrid], the
installation angle can be corrected.
Checking the device and version	the
information	General
1 Touch [Settings] in the navigation menu,
2 Touch [Service Info Screen].	Settings
then touch [Hardware].
3 Check the device and version information.	for
	Navigation
Checking the hard disk informa-
tion	Functions
You can check the volume of the hard disk, cur-
rent used space and remaining space.

❒The hard disk space (%) means a free space of the music library. In some cases, even when about 10% of free space is left, no more music track may be recorded due to system restric- tion.

95