Pioneer AVIC-Z1 operation manual Editing Waypoints, Adding a waypoint

	3 Touch the screen and place the scroll cur-
NAVI	sor on the point whose detail or entire pic-
	ture you want to view. Or zoom in or zoom
	out the map scale.

The map around the scroll cursor is zoomed in or out so you can view the detail or the entire picture.

4 Touch [Back].

You can return to the previous display.

	❒ You can also check the overview by using
	the shortcut menu if [Whole Route Over-
	view] is selected on the [Short-Cut
2	Selection].
Chapter

Basic Operation

Editing Waypoints

You can select waypoints (locations you want to visit on the way to your destination) and you can recalculate the route to pass through these loca- tions.

Adding a waypoint

Up to 5 waypoints can be selected, and selected points can be sorted automatically or manually.

1 Touch [Destination] in the navigation menu, and then touch [Route Overview].

2 Touch [Waypoints].

The waypoint menu screen appears.

3 Touch [Add].

Switch the display to search for points. After searching for a point, display it on a map, then touch [OK] to add to the waypoints. (You can add up to five waypoints in total.)

4 Touch [OK].

A route is recalculated, and “Route confirma- tion screen” appears.

❒If you set a waypoint(s) in the route to your destination, the route up to the next way- point will appear light green. The rest of the route will be light in blue.

34