Pioneer AVIC-Z1 Changing the voice output, Navigation guidance, Setting the clock display on

	Changing the voice output of the
AV	navigation guidance

You can set the speaker to output the navigation guidance and phone voice, etc.

1 Touch [Guide/Tel SP] in the System Set- tings menu.

Each touch of [Guide/Tel SP] changes the settings as follows:

•Left SP — Uses only the front left speaker

•Right SP — Uses only the front right speaker

•L+R SP — Uses both the front right and left speakers

Switching the auto antenna set- ting

If the blue lead of the navigation system is con- nected to the auto antenna of the vehicle, select either of the following settings.

•Radio — Extends the antenna only for the FM or AM source. The antenna is stored when the source is switched to another.

•Power — Extends the antenna when the igni- tion switch is turned on. The antenna is stored when the ignition switch is turned off.

	1 Touch [Auto ANT] in the System Set-
	tings.
16	Touching [Auto ANT] switches between
	[Radio] and [Power].
Chapter	❒ Regardless of whether [Radio] or [Power]
	retract.
	is selected, turning off the ignition switch
	will cause the antenna to automatically

relatedSettingAudio VisualAudiowith	Setting the clock display on the
	video image
	You can select whether to display the clock on
	the video image screen without touch keys, such
	as DVD-Video, AV INPUT, or TV tuner.
the	1 Touch [Clock DISP] in the System Set-
Customizing	tings menu.
	Touching [Clock DISP] switches between
	[All SCRN] and [Audio SCRN].
	• All SCRN — The clock is overlaid on the
	“Video image”
	• Audio SCRN — The clock is not overlaid
	on the “Video image”

Setting the CD recording mode

You can set whether to start recording tracks automatically when you plays a CD, or to manu- ally trigger recording.

1 Touch [REC Mode] in the System Set- tings menu.

Each touch of [REC Mode] changes the set- tings as follows:

•Auto — Records the tracks automatically when a CD is played

•Manual — Lets you select the tracks you want to record manually, and records them

•Single — Automatically records only the first track of the CD

Setting the rear output and sub- woofer controller

The navigation system’s rear output can be used for full-range speaker or subwoofer connection. If you switch Rear SP setting to the Sub.W, you can connect a rear speaker lead directly to a sub- woofer without using an auxiliary amp.

Initially, navigation system is set for rear fullrange speaker connection. When rear output is con- nected to fullrange speakers (when Rear SP set- ting is Full), you can connect the RCA subwoofer output (description on the label) to a subwoofer. In this case, you can select whether to use the subwoofer controller’s (low pass filter, phase) built-in amp of the navigation system or the auxil- iary amp or subwoofer.

❒If you change the subwoofer controller [Rear SP] or [Preout], [Sub Woofer] or [Non Fad- ing] in the Audio Settings menu return to the factory settings.

❒Both rear speaker leads output and RCA rear output are switched simultaneously in this setting.

❒Rear SP can be set only when the source is OFF.

156