Pioneer AVIC-Z1 Switching the auxiliary setting, Switching the muting/attenua- tion timing

❒When a Pioneer external unit is connected with an IP-BUS cable, select [EXT]. When the audio source is [EXT], the “Video image” of the Pioneer external unit can be displayed.

Switching the auxiliary setting

It is possible to use auxiliary equipment with navi- gation system as the one of source. Activate the auxiliary setting when using auxiliary equipment connected to the navigation system.

1 Touch [AUX Input] in the System Set- tings menu.

Touching [AUX Input] switches between [On] and [Off].

➲Selecting AUX as the source ➞ Page 145

Switching the muting/attenua- tion timing

You can select the audio source volume is muted or attenuated what signal is output. This setting is invalid for the mute signal has been received from the CELLULAR MUTE lead connected to the navigation unit. (Even if this setting is [Off], the navigation system will mute or attenuate the audio source volume, when the signal via CELLU- LAR MUTE lead is output.)

1 Touch [Mute Set] in the System Settings menu.

Each touch of [Mute Set] changes the set- tings as follows:

•Guide/Tel/VR — The volume is muted or attenuated by the following condition

—When the navigation outputs the guidance voice.

—When you use a cellular phone via Blue- tooth technology (dialing, talking, incoming call).

—When the voice recognition mode is acti- vated.

•Tel/VR — The volume is muted or attenu- ated by the following condition

—When you use a cellular phone via Blue- tooth technology (dialing, talking, incoming call).

—When the voice recognition mode is acti- vated.

• Off — The Volume does not change

❒ Operation returns to normal when the cor-

	respond action is ended.		AV
❒	Even when navigation voice guidance itself
	cannot be attenuated or muted. If you want
	to mute the navigation guidance voice
	temporarily, use	on the navigation map
	screen.

Switching the muting/attenua- tion level

You can select the muting/attenuation level of [Mute Set]. This setting is also effected for the mute signal has been received from the CELLU- LAR MUTE lead connected to the navigation unit.

❒This menu is not available in the following cases :

— Audio source is [OFF]
— During muting/attenuation
— [5.1Ch Setup] is [On]
1 Touch [Mute Level] in the System Set-
tings menu.
Each touch of [Mute Level] changes the set-
tings as follows:
• All — The volume becomes 0
• –20dB — The volume becomes 1/10
• –10dB — The volume becomes 1/3
❒ When you select [All], [Mute] is displayed
	and no audio adjustments are possible
	during the sound is turned off.	Chapter
❒	When you select [–20dB] or [–10dB], no
	audio adjustments, except volume control,
	are possible during the sound is attenu-
	ated.	16
❒	Operation returns to normal when the cor-
	respond action is ended.	withAudioVisual	CustomizingtheAudio
❒	Even when a mute signal has been
	received from the CELLULAR MUTE lead
	connected to the navigation unit, naviga-
	tion voice guidance cannot be attenuated
	or muted. If you want to mute the naviga-
	tion guidance voice temporarily, use
	on the navigation map screen.		Setting related

155