10 PPPoE Advanced Settings | TP-Link TL-WR843ND manual

Figure 4-10 PPPoE Advanced Settings

TL-WR843ND300Mbps Wireless AP/Client Router User Guide

Figure 4-10 PPPoE Advanced Settings

MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP.

Service Name/AC Name - The service name and AC (Access Concentrator) name should not be configured unless you are sure it is necessary for your ISP. In most cases, leaving these fields blank will work.

ISP Specified IP Address - If your ISP does not automatically assign IP addresses to the Router during login, please click “Use IP address specified by ISP” check box and enter the IP address provided by your ISP in dotted-decimal notation.

Detect Online Interval - The Router will detect Access Concentrator online at every interval. The default value is “0”. You can input the value between “0” and “120”. The value “0” means no detect.

Primary DNS/Secondary DNS - If your ISP does not automatically assign DNS addresses to the Router during login, please click “Use the following DNS servers” check box and enter the IP address in dotted-decimal notation of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it as well.

Click the Save button to save your settings.

4.If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable. And you should enter the following parameters (Figure 4-11):

- 32 -

Image 40

TP-Link manual TL-WR843ND 300Mbps Wireless AP/Client Router User Guide, 10 PPPoE Advanced Settings

Contents

TL-WR843ND 300Mbps Wireless AP/Client Router Rev 1.0.0 COPYRIGHT & TRADEMARKS FCC STATEMENT FCC RF Radiation Exposure Statement CE Mark WarningCanadian Compliance Statement Industry Canada Statement Korea Warning Statements Safety InformationNCC Notice Product Description 300Mbps Wireless AP/Client Router DECLARATION OF CONFORMITYETSI EN 300 328 V1.7.1 ETSI EN 301 489-1 V1.8.12008& ETSI EN 301 489-17 EN EN CONTENTS Package ContentsChapter 2. Connecting the Router Chapter 3. Quick Installation Guide 4.7.5 Appendix A FAQ Appendix B Configuring the PCAppendix C Specifications Appendix D Glossary TL-WR843ND 300Mbps Wireless AP/Client Router User Guide Package Contents Note Flexible Access Control Chapter 1. Introduction1.1 Overview of the Router Incredible Speed Simple Installation 1.3 Main Features1.2 Conventions 1.4 Panel Layout 1.4.1 The Front PanelName Indication  Used as RESET button 1.4.2 The Rear Panel  Used as WPS button Chapter 2. Connecting the Router 2.2 Installation Environment Requirements2.3 Connecting the Router 2.1 System Requirements b Standard Wireless Router Mode a WISP Client Router Mode Figure 2-3 Wall-mount Install Chapter 3. Quick Installation Guide 3.1 TCP/IP Configuration Please check the connection following these steps 3.2 Quick Installation Guide Enter key 300Mbps Wireless AP/Client Router User Guide TL-WR843ND Figure 3-7 WAN Connection Type 3.2.1 Configuration for Router ModeFigure 3-8 MAC Clone Figure 3-9 Quick Setup - PPPoE Figure 3-10 Quick Setup - Static IP Note Figure 3-11 Quick Setup - Wireless  PSK Password - You can enter ASCII or Hexadecimal characters 3.2.2 Configuration for Client Router Mode4.7 Wireless b If you choose PPPoE, you will see this page shown in Figure The IP parameters should have been provided by your ISP Figure 3-15 Static IP  Survey - Click this button, you can survey the AP which runs nearby  Note Figure 3-17 AP List Figure 3-18 Quick Setup - Wireless Figure 3-19 Finish 4.1 Login Chapter 4. Configuring the Router4.2 Status Please refer to 3.2 Quick Installation Guide 4.3 Quick SetupFigure 4-1 Router Status I. Use the Wi-Fi Protected Setup Button 4.4 WPS II. Enter the client device’s PIN on the Router III. Enter the Router’s PIN on your client device 4.5 Working Mode Figure 4-5 Working Mode 4.6 Network 4.6.1 WAN  Host Name - This option specifies the Host Name of the Router Figure 4-9 WAN - PPPoE  Disabled - The Secondary Connection is disabled by default, so there is PPPoE connection only. This is recommended Figure 4-10 PPPoE Advanced Settings NSW / ACT - nsw.bigpond.net.au TL-WR843ND 300Mbps Wireless AP/Client Router User Guide TL-WR843ND 300Mbps Wireless AP/Client Router User Guide Figure 4-13 PPTP Settings  Dynamic IP - Connections which use dynamic IP address assignment 4.6.2 MAC Clone Static IP - Connections which use static IP address assignment 4.6.3 LAN Only the PC on your LAN can use the MAC Address Clone function 4.7.1 Wireless Settings 4.7 Wireless4.7.1.1. Wireless Settings on Router Mode Note Dialog  Mode - Select the desired mode. The default setting is 11bgn mixed  With the Antenna in the upright position  In an elevated location such as a high shelf Away from large metal surfaces 4.7.1.2. Wireless Settings on WISP Client Router Mode Figure 4-18 Wireless Settings Figure 4-19 AP List TL-WR843ND 300Mbps Wireless AP/Client Router User Guide 4.7.2 Wireless Security Figure 4-21 Wireless Security ∙ Encryption - You can select either Automatic, or TKIP or AES TL-WR843ND 300Mbps Wireless AP/Client Router User Guide 4.7.3 Wireless MAC Filtering 4.7.4 Wireless Advanced To modify or delete an existing entry Figure 4-27 Wireless Advanced 4.7.5 Wireless Statistics This page will be refreshed automatically every 5 seconds 4.8.1 DHCP Settings 4.8 DHCP 4.8.2 DHCP Client List 4.8.3 Address Reservation Figure 4-32 Address Reservation To Reserve an IP addressFigure 4-33 Add or Modify an Address Reservation Entry 4.9 Forwarding 4.9.1 Virtual Servers To set up a virtual server entry 4.9.2 Port Triggering To add a new rule, follow the steps below 4.9.3 DMZ 3 Incoming Ports cannot overlap each other 4.9.4 UPnP To assign a computer or server to be a DMZ server 4.10Security 4.10.1 Basic Security Figure 4-42 Basic Security 4.10.2 Advanced Security 4.10.3 Local Management 4.10.4 Remote Management Figure 4-44 Local Management Figure 4-46 Parental Control Settings 4.11 Parental ControlFigure 4-45 Remote Management To add a new entry, please follow the steps below  Modify - Here you can edit or delete an existing entry Click Add New... button 4.12Access Control 4.12.1 Rule There are two methods to add a new rule Method One If the MAC Address is selected, you can see the following item If the IP Address is selected, you will see the following items Method Two Figure 4-55 Add Internet Access Control Entry 4.12.2 Host Figure 4-56 Host Settings 4.12.3 Target Figure 4-59 Target Settings Figure 4-60 Add or Modify an Access Target Entry Figure 4-61 Add or Modify an Access Target Entry 4.12.4 Schedule To add a new schedule, follow the steps below Figure 4-63 Advanced Schedule Settings 4.13Advanced RoutingFigure 4-64 Advanced Routing Menu 4.13.1 Static Routing To add static routing entries, follow the steps below 4.14 Bandwidth Control 4.13.2 System Routing Table 4.14.1 Control Settings 4.14.2 Rules List 4.15 IP & MAC Binding 4.15.1 Binding SettingsTo add a Bandwidth Control rule, follow the steps below To add IP & MAC Binding entries, follow the steps below To modify or delete an existing entry, follow the steps belowFigure 4-72 Binding Settings Figure 4-73 IP & MAC Binding Settings 4.15.2 ARP List To find an existing entry, follow the steps below 4.16 Dynamic DNS 4.16.1 Comexe.cn DDNS To set up for DDNS, follow these instructions 4.16.2 Dyndns.org DDNS Figure 4-77 Dyndns.org DDNS Settings 4.16.3 No-ip.com DDNSFigure 4-78 No-ip.com DDNS Settings 4.17.1 Time Settings 4.17 System Tools To set time manually 4.17.2 Diagnostic To set time automaticallyTo set Daylight Saving 2 The time will be lost if the router is turned off Figure 4-81 Diagnostic Tools 4.17.3 Firmware Upgrade To upgrade the Routers firmware, follow these instructions below 4.17.5 Backup & Restore 4.17.4 Factory Defaults4 The Router will reboot after the upgrading has been finished 4.17.6 Reboot 4.17.7 Password 4.17.8 System Log Figure 4-88 System Log 4.17.9 Statistics    Statistics Table 300Mbps Wireless AP/Client Router User Guide ResetUDP Tx SYN Tx Appendix A FAQ 1. How do I configure the Router to access Internet by ADSL users? 3. I want to use NetMeeting, what do I need to do? Figure A-5 Add or Modify a Virtual server Entry 4. I want to build a WEB Server on the LAN, what should I do? Figure A-7 Basic Security 5. The wireless stations cannot connect to the Router Appendix B Configuring the PC 1. Configure TCP/IP component  Setting IP address automatically Now you have two ways to configure the TCP/IP protocol belowshown in the Figure below Figure B-2  Setting IP address manually Figure B-3 Now click OK to keep your settings Appendix C Specifications WirelessGeneral Environmental and Physical Appendix D Glossary hosts to the Internet over an always-on connection by simulating a dial-up connection