TP-Link manual TL-WR843ND 300Mbps Wireless AP/Client Router User Guide, 19 AP List

TL-WR843ND300Mbps Wireless AP/Client Router User Guide

WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the index of the WEP key.

Auth type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX).It indicates the authorization type of the Root AP.

Password - If the AP your Router is going to connect needs password, you need to fill the password in this blank.

Local SSID - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network.

Enable Wireless Router Radio - The wireless radio of the Router can be enabled or disabled to allow wireless stations access. If enabled, the wireless stations will be able to access the Router. Otherwise, wireless stations will not be able to access the Router and you cannot access to the WISP.

Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the wireless router will broadcast its name (SSID) on the air.

Disable Local Wireless Access - If you select the Disable Local Wireless Access checkbox, the wireless router will disable local wireless access; other stations will not be able to access the Router by wireless.

Click Survey button on the Wireless page shown as Figure 4-18,and then AP List page will appear, as shown in Figure 4-19.Find the SSID of the Access Point you want to access, and click Connect in the corresponding row. For example, the desired item is selected. The target network’s SSID will be automatically filled into the corresponding box which is shown as the Figure 4-20.

Figure 4-19 AP List

- 44 -