Quick Installation Guide, Enter key,  Note | TP-Link TL-WR843ND

3.2 Quick Installation Guide

TL-WR843ND300Mbps Wireless AP/Client Router User Guide

3.Is the default LAN IP of the Router correct?

Note:

If the LAN IP of the modem connected with your router is 192.168.0.x, the default LAN IP of the Router will automatically switch from 192.168.0.1 to 192.168.1.1 to avoid IP conflict. Therefore, in order to verify the network connection between your PC and the Router, you can open a command prompt, and type ping 192.168.1.1, and then press Enter.

3.2 Quick Installation Guide

With a Web-based utility, it is easy to configure and manage the TL-WR843ND 300Mbps Wireless AP/Client Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.

1.To access the configuration utility, open a web-browser and type in the default address http://tplinklogin.net in the address field of the browser.

Figure 3-3Log in the Router

After a moment, a login window will appear, similar to the Figure 3-4.Enter admin for the User Name and Password, both in lower case letters. Then click the OK button or press the

Enter key.

Figure 3-4 Login Windows

Note:

If the above screen does not pop-up, it means that your Web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it.

- 12 -

Image 20

TP-Link manual Quick Installation Guide, Enter key, TL-WR843ND 300Mbps Wireless AP/Client Router User Guide,  Note

Contents

TL-WR843ND 300Mbps Wireless AP/Client Router Rev 1.0.0 COPYRIGHT & TRADEMARKS FCC STATEMENT FCC RF Radiation Exposure Statement CE Mark WarningCanadian Compliance Statement Industry Canada Statement NCC Notice Safety InformationKorea Warning Statements Product Description 300Mbps Wireless AP/Client Router DECLARATION OF CONFORMITYETSI EN 300 328 V1.7.1 ETSI EN 301 489-1 V1.8.12008& ETSI EN 301 489-17 EN EN CONTENTS Package ContentsChapter 2. Connecting the Router Chapter 3. Quick Installation Guide 4.7.5 Appendix A FAQ Appendix B Configuring the PCAppendix C Specifications Appendix D Glossary  Note Package ContentsTL-WR843ND 300Mbps Wireless AP/Client Router User Guide Flexible Access Control Chapter 1. Introduction1.1 Overview of the Router Incredible Speed 1.2 Conventions 1.3 Main FeaturesSimple Installation 1.4 Panel Layout 1.4.1 The Front PanelName Indication  Used as RESET button 1.4.2 The Rear Panel  Used as WPS button Chapter 2. Connecting the Router 2.2 Installation Environment Requirements2.3 Connecting the Router 2.1 System Requirements b Standard Wireless Router Mode a WISP Client Router Mode Figure 2-3 Wall-mount Install Chapter 3. Quick Installation Guide 3.1 TCP/IP Configuration Please check the connection following these steps 3.2 Quick Installation Guide Enter key 300Mbps Wireless AP/Client Router User Guide TL-WR843ND Figure 3-8 MAC Clone 3.2.1 Configuration for Router ModeFigure 3-7 WAN Connection Type Figure 3-9 Quick Setup - PPPoE Figure 3-10 Quick Setup - Static IP Note Figure 3-11 Quick Setup - Wireless 4.7 Wireless 3.2.2 Configuration for Client Router Mode PSK Password - You can enter ASCII or Hexadecimal characters b If you choose PPPoE, you will see this page shown in Figure The IP parameters should have been provided by your ISP Figure 3-15 Static IP  Survey - Click this button, you can survey the AP which runs nearby  Note Figure 3-17 AP List Figure 3-18 Quick Setup - Wireless Figure 3-19 Finish 4.2 Status Chapter 4. Configuring the Router4.1 Login Figure 4-1 Router Status 4.3 Quick SetupPlease refer to 3.2 Quick Installation Guide I. Use the Wi-Fi Protected Setup Button 4.4 WPS II. Enter the client device’s PIN on the Router III. Enter the Router’s PIN on your client device 4.5 Working Mode Figure 4-5 Working Mode 4.6 Network 4.6.1 WAN  Host Name - This option specifies the Host Name of the Router Figure 4-9 WAN - PPPoE  Disabled - The Secondary Connection is disabled by default, so there is PPPoE connection only. This is recommended Figure 4-10 PPPoE Advanced Settings NSW / ACT - nsw.bigpond.net.au TL-WR843ND 300Mbps Wireless AP/Client Router User Guide TL-WR843ND 300Mbps Wireless AP/Client Router User Guide Figure 4-13 PPTP Settings  Static IP - Connections which use static IP address assignment 4.6.2 MAC Clone Dynamic IP - Connections which use dynamic IP address assignment 4.6.3 LAN Only the PC on your LAN can use the MAC Address Clone function 4.7.1.1. Wireless Settings on Router Mode 4.7 Wireless4.7.1 Wireless Settings Note Dialog  Mode - Select the desired mode. The default setting is 11bgn mixed  Away from large metal surfaces  In an elevated location such as a high shelf With the Antenna in the upright position 4.7.1.2. Wireless Settings on WISP Client Router Mode Figure 4-18 Wireless Settings Figure 4-19 AP List TL-WR843ND 300Mbps Wireless AP/Client Router User Guide 4.7.2 Wireless Security Figure 4-21 Wireless Security ∙ Encryption - You can select either Automatic, or TKIP or AES TL-WR843ND 300Mbps Wireless AP/Client Router User Guide 4.7.3 Wireless MAC Filtering 4.7.4 Wireless Advanced To modify or delete an existing entry Figure 4-27 Wireless Advanced 4.7.5 Wireless Statistics This page will be refreshed automatically every 5 seconds 4.8.1 DHCP Settings 4.8 DHCP 4.8.2 DHCP Client List 4.8.3 Address Reservation Figure 4-33 Add or Modify an Address Reservation Entry To Reserve an IP addressFigure 4-32 Address Reservation 4.9 Forwarding 4.9.1 Virtual Servers To set up a virtual server entry 4.9.2 Port Triggering To add a new rule, follow the steps below 4.9.3 DMZ 3 Incoming Ports cannot overlap each other 4.9.4 UPnP To assign a computer or server to be a DMZ server 4.10Security 4.10.1 Basic Security Figure 4-42 Basic Security 4.10.2 Advanced Security 4.10.3 Local Management 4.10.4 Remote Management Figure 4-44 Local Management Figure 4-45 Remote Management 4.11 Parental ControlFigure 4-46 Parental Control Settings To add a new entry, please follow the steps below  Modify - Here you can edit or delete an existing entry Click Add New... button 4.12Access Control 4.12.1 Rule There are two methods to add a new rule Method One If the MAC Address is selected, you can see the following item If the IP Address is selected, you will see the following items Method Two Figure 4-55 Add Internet Access Control Entry 4.12.2 Host Figure 4-56 Host Settings 4.12.3 Target Figure 4-59 Target Settings Figure 4-60 Add or Modify an Access Target Entry Figure 4-61 Add or Modify an Access Target Entry 4.12.4 Schedule To add a new schedule, follow the steps below Figure 4-64 Advanced Routing Menu 4.13Advanced RoutingFigure 4-63 Advanced Schedule Settings 4.13.1 Static Routing To add static routing entries, follow the steps below 4.14 Bandwidth Control 4.13.2 System Routing Table 4.14.1 Control Settings 4.14.2 Rules List To add a Bandwidth Control rule, follow the steps below 4.15.1 Binding Settings4.15 IP & MAC Binding To add IP & MAC Binding entries, follow the steps below To modify or delete an existing entry, follow the steps belowFigure 4-72 Binding Settings Figure 4-73 IP & MAC Binding Settings 4.15.2 ARP List To find an existing entry, follow the steps below 4.16 Dynamic DNS 4.16.1 Comexe.cn DDNS To set up for DDNS, follow these instructions 4.16.2 Dyndns.org DDNS Figure 4-78 No-ip.com DDNS Settings 4.16.3 No-ip.com DDNSFigure 4-77 Dyndns.org DDNS Settings 4.17.1 Time Settings 4.17 System Tools To set time manually 4.17.2 Diagnostic To set time automaticallyTo set Daylight Saving 2 The time will be lost if the router is turned off Figure 4-81 Diagnostic Tools 4.17.3 Firmware Upgrade To upgrade the Routers firmware, follow these instructions below 4 The Router will reboot after the upgrading has been finished 4.17.4 Factory Defaults4.17.5 Backup & Restore 4.17.6 Reboot 4.17.7 Password 4.17.8 System Log Figure 4-88 System Log 4.17.9 Statistics    Statistics Table 300Mbps Wireless AP/Client Router User Guide ResetUDP Tx SYN Tx Appendix A FAQ 1. How do I configure the Router to access Internet by ADSL users? 3. I want to use NetMeeting, what do I need to do? Figure A-5 Add or Modify a Virtual server Entry 4. I want to build a WEB Server on the LAN, what should I do? Figure A-7 Basic Security 5. The wireless stations cannot connect to the Router Appendix B Configuring the PC 1. Configure TCP/IP component  Setting IP address automatically Now you have two ways to configure the TCP/IP protocol belowshown in the Figure below Figure B-2  Setting IP address manually Figure B-3 Now click OK to keep your settings Appendix C Specifications WirelessGeneral Environmental and Physical Appendix D Glossary hosts to the Internet over an always-on connection by simulating a dial-up connection