Pioneer AVIC-Z1 operation manual Modifying the General Settings for Navigation Functions, Chapter

Chapter 10

Modifying the General Settings for Navigation Functions

NAVI

•For safety reasons, these functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the parking brake before setting your route (see page 18 Interlock for details).

Entering the Settings Menu

1 Press the MENU button to display the navigation menu.

2 Touch [Settings] to display the Settings menu.

3 Change the setting.

Adjusting each item ➞ Page 91 to 98

❒This section describes the details of the setting for each item. Settings marked with an asterisk (*) show that they are default or factory settings.

Setting the Volume Related to the Guidance and Phone

The sound volume for the navigation can be set. You can separately set the volume of the route guidance and the beep sound.

1 Touch [Settings] in the navigation menu, then touch [Volume].

2 Touch [+] or [–] to set their volume.

On this screen, you can operate the following items.

Guidance

This setting controls the guidance volume of navigation.

When you set this to , a guidance is out-

put. When you set this to , no guidance is output.

Beep

This setting controls the beep tone volume of navigation.

Phone Ringtone

This setting controls the incoming ring tone volume.

Phone Voice

This setting controls the incoming voice vol- ume.

❒The Phone Ringtone and Phone Voice adjustments are related to the cellular phone featuring BT technology. No adjust- ment is needed when the cellular phone featuring BT technology is not connected.

❒Volume of the audio source is adjusted by

the VOL (	) button of the navigation
system.

3 To finish the setting, touch [OK].

Customizing the Regional Set- tings

Changing the language for navi- gation guidance and menu

You can select the language to be used for the navigation function. (Once you change the lan- guage, the program restarts.)

•Once the installation of the program starts, do not stop the engine of your vehicle and do not switch off the navigation system until the installation is completed and the map of your surroundings appears.

Chapter 10

Modifying the General Settings for Navigation Functions

91