Pioneer AVIC-Z1 Setting for rear view camera, Setting the video input, Camera for backing up

	A picture is enlarged by the same proportion
AV	as Full or Zoom in the horizontal direction
	and by an intermediate proportion between
	Full and Zoom in the vertical direction; ideal
	for a cinema-sized picture (wide screen pic-
	ture) where captions lie outside the frame.

Zoom (zoom):

A 4:3 picture is enlarged in the same propor- tion both vertically and horizontally; ideal for a cinema-sized picture (wide screen picture).

❒Different settings can be memorized for each video source.

❒When video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear differently.

❒Remember that use of this system for com- mercial or public viewing purposes may constitute an infringement on the author’s rights protected by the Copyright Law.

❒Video will appear grainy when viewed in Cinema or Zoom mode.

❒The navigation map and the rear view cam- era picture is always Full.

Setting for rear view camera

	The following two functions are available. The
	rear view camera feature requires a separately
	sold rear view camera (e.g. ND-BC1). (For details,
16	consult your dealer.)
Chapter	Camera for backing up
	camera image installed on your vehicle. When
	The navigation system features a function that
	automatically switches to the full-screen rear
SettingAudiorelated Audiowith Visual	the shift lever is in REVERSE (R) position, the
	split screen where map information is partially
	screen automatically switches to full-screen rear
	view camera.
	Camera for Rear view mode
	[Rear View] can be displayed at all times (e.g.
	when monitoring an attached trailer, etc.) as a
the	displayed. Please be aware that in this setting,
Customizing	camera image is not resized to fit, but that a por-
	tion of what is seen by the camera is not view-
	able.

•Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed.

❒Immediately confirm whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position.

❒When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting.

❒Initially, this function is set to On.

1 Touch [Camera Input] in the System Set- tings menu.

2 Touch [On] to turn rear view camera set- ting on.

❒Unless this setting is [On], you cannot switch to Rear View mode.

3 Touch [Polarity] to select an appropriate setting for polarity.

Each time you touch [Polarity] switches between the following polarity:

•Battery — When the polarity of the con- nected lead is positive while the shift lever is in the REVERSE (R) position

•GND — When the polarity of the connected lead is negative while the shift lever is in the REVERSE (R) position

Setting the video input

You can switch the setting according to the con- nected component.

❒Select [Video] to watch video of a connected component as AV source.

1 Touch [AV Input] in the System Settings menu.

Each touch of [AV Input] changes the set- tings as follows:

•Off — No video component is connected

•Video — External video component

•EXT — Pioneer external unit connected with RCA video cable

154