Pioneer AVIC-Z1 operation manual Press the MENU button and then touch Settings

NAVI/AV

Appendix

7 Press the MENU button and then touch [Settings].

The setting menu appears.

8 Touch [Hardware] and then touch [3D Calibration Status].

9 Touch [Learning Status] and then touch [Reset All].

Adjusting the Response Posi- tions of the Touch Panels (Touch Panel Calibration)

If you feel that the touch keys on the screen devi- ate from the actual positions that respond to your touch, adjust the response positions of the touch panel. There are two adjustment methods: 4-point adjustment, in which you touch four corners of the screen; and 16-point adjustment, in which you make fine-adjustments on the entire screen.

❒Make sure to use the supplied stylus for adjustment, and gently touch the screen. If you press the touch panel forcefully, the touch panel may be damaged. Do not use a sharp pointed tool such as a ballpoint pen or a mechanical pen. Otherwise the screen is damaged.

Stylus (supplied with navigation system)

1 Press the V button.

The Picture Adjust screen appears.

2 Press and hold the V button for two sec- onds or more.

The 4-point touch panel adjustment screen appears.

3 Touch and hold each of the arrows on the four corners of the screen with the touch panel adjustment pen.

Hold the pen on the arrow until each one of the four arrows turns red.

178