Pioneer AVIC-Z1 operation manual Basic Operation, Flow from Startup to Termina, Chapter

	Chapter 2
Basic Operation
Flow from Startup to Termina-	4 Assign a destination by using the touch
tion	panel key and beginning route guidance,
	or operate the Audio source.

At first, please confirm the positions of the follow- ing features using the “Hardware Manual”.

•MAP button

•MENU button

•AV button

•OPEN CLOSE button

NAVI

1 Start the engine to boot up the system.	❒ Touch keys which are not available at this
After some time, the navigation opening
	time are grayed out.
screen comes on for a few seconds. Then, a
	➲ Specifying the address and searching the
message screen is displayed.
	destination ➞ Page 25
2 Check the details of the cautionary mes-	➲ Searching the destination by map ➞
sage and touch [OK].	Page 43
You can operate the navigation system by	➲ Other search methods ➞ Page 51 to 56
touching keys displayed on the screen.	➲ How to use audio source ➞ Page 99 to 159
The map of your surroundings is displayed.	5 Turn off the vehicle engine to terminate
If the route is already set, the screen changes
to route guidance mode.	the system.
	This navigation system is also turned off.
When you use the navigation system for the first	❒ Until your vehicle reach the vicinity of the
	destination, the set route will not be
time, [Regional Settings] screen appears. On
	deleted even if the engine is turned off.
[Regional Settings] screen, you can change the
language or time. (The settings can also be
changed afterward.)
➲ “Customizing the Regional Settings” ➞
Page 91

Chapter 2

Basic Operation

➲How to read the current position screen ➞ Page 37

➲Setting the time ➞ Page 92

❒To protect the LCD screen from damage, be sure to touch the touch keys with a fin- ger. (The stylus is supplied for special cali- brations. Do not use the stylus for normal operations.)

3 Press the MENU button. Displays the navigation menu.

23