Kraftware Corporation DS-32M2, DS-16M2 Switch Mounting Kit DS-16Mor DS-32M, Component

Switch Mounting Kit (DS-16M or DS-32M)

Switch Mounting Kit (DS-16M or DS-32M)

The DS16- and DS32-CRKHkits contain the16- or 32-port standard switch rail mounting kits, and the DS16- and DS32-CRKLkits contain the 16- or 32-port low protrusion rail mounting kits.

Component		Use
2 mounting brackets - see illustration on page 17.		2 per switch
2 short rail assemblies (20.5 inches to 27 inches)- see illustration on		2 per switch
page 6 or page 12
or
2 long rail assemblies (27 inches to 34 inches)- see illustration on
page 6 or page 12
	#10 flat washer	2 per rail assembly to secure adjustable
	M5 kep nut	rail to the “C” channel.
	6-32 x .31 screws	5 thread-forming screws per bracket to
		secure bracket to switch (10)
		or
		5 non thread-forming screws per
		bracket to secure the bracket to the
		switch (10)
		Note: The kits include two (2) bags of
		6-32 x .31 screws. Be sure to check the
		labeling on the bags and the chassis
		number label located on the back and
		bottom of the chassis to ensure that you
		use the correct screws for your chassis.
	M5 x 12 mm screws	4 per rail for DS-16M in round-hole
		channels (8)
		3 per rail for DS-32M in round-hole
		channels (6)
	Square-hole washer	4 per rail for DS-16M in square-hole
	M5 x 16 mm screws	channels (8)
		3 per rail for DS-32M in square-hole
		channels (6)
	M3 x 8 mm screws	1 per bracket, used to secure brackets
		to the rails (2)

EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide

3