Kraftware Corporation DS-16M2 Tools Required for Installation, 5/16-in.nut driver, Component

Switch Mounting Kit (DS-16M or DS-32M)

Component	Use
#10 washers	1 washer and 1 ball stud per rail to hold
ball studs	bezel (2)
	39U bezel only
Latch brackets and keyplate spacers	2 each to secure 1U bezel for 16M
	switch in 40U cabinets
Left and right latch brackets	1 left and 1 right to secure 2U bezel for
	32M switch in 40U cabinet
1U or 2U, low-profile or standard-profile bezel (front rack panel)	1 per switch
Two 7-foot USA power cords, straight C13 to N5-15P straight	2 per switch
Two 6-foot IEC power cords, straight C13 to C14 straight	(use the ones appropriate for your PDU)

Tools Required for Installation

You will need to have the following tools available to complete the installation of the rails and switch(es).

◆# 1 Phillips head screwdriver

◆1/4-in. nut driver

◆5/16-in. nut driver

4

EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide