Kraftware Corporation DS-32M2, DS-16M2 installation instructions Assemble the rails

Installing the DS-16M and DS-32M Rails

Select the appropriate length rails, and follow the steps below to install them.

1.Assemble the rails.

The rails assembly consists of an adjustable rail, a C channel, and two washers and nuts. See the figure below.

C channel

Adjustable rail

a.Insert the threaded posts on the C channel into the slot on the adjustable rail.

b.Secure the rail to the C channel with two #10 flat washers and M5 kep nuts. Leave the nuts finger-tight.

2.Determine where in the rack/cabinet you are going to locate the switch.

The left/right orientation of the rails is determined by the location of the word “top” on the C channel. The rail is oriented correctly when the word “top” is up and toward the rack/cabinet front. See the figure below.

"Top" up and to the rack/cabinet front

EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide

13