Pioneer AVIC-Z1 operation manual Changing a pronunciation, Entering or changing a phone number

Changing a pronunciation

1 Touch [Pronunciation], then touch [Yes].

2 Enter a new pronunciation, then touch [OK].

The current name appears in the text box (when available). Delete the current name, and enter a new name between 1 and 22 char- acters long.

3 If the pronunciation is suitable, touch [Yes].

The details you set are registered, and the Address Book menu appears.

Alternative options: No:

Jump to the pronunciation input screen. Repeat:

You can reconfirm the pronunciation of the name you entered.

No sounds can be output during .

❒When you confirm the pronunciation, is shown on the left side of the location name displayed in the Address Book menu. This mark indicates that this name can be used as a voice command during voice operation.

❒You cannot change the name of your home.

❒If nothing is entered in the text box, you cannot use that item as the voice com- mands.

Entering or changing a phone number

1 Touch [Phone #].

2 Input a phone number, then touch [OK]. The Address Information menu appears.

❒To change a registered phone number, delete the existing number and then enter a new one.

Selecting an icon to appear on the map

1 Touch [Icon]. NAVI

2 Touch the desired icon to appear on the map.

The Address Information menu appears.

❒You cannot change the icon of your home or of your favorite location.

Customizing the picture

Be sure to read “Limitations for import the	Chapter6
picture” before creating the CD-R (-RW).
➲ “Limitations for import the picture” ➞
Page 97
You can customize a picture for the registered
point. Some pictures are already stored in the	Registering
camera by using CD-R(-RW). If you burn the pic-
hard disk drive, and you can also import JPEG for-
mat pictures, such as a picture on your digital
tures into a CD-R (-RW) by your PC and insert	and
that to the navigation system, you can use them.	Editing
Here, a method for changing the picture is
described with an example of loading a picture	Locations
stored on a CD-R (-RW) onto the navigation sys-
tem.

1 Check that no disc is inserted, and insert your CD-R (-RW) to the disc loading slot.

2 Touch [Picture], and then touch [Import from Disc].

The list of the pictures stored in a CD-R (-RW) is displayed.

On this screen, you can select the following item:

Back to Original:

The picture originally used when the system was purchased is selected.

63