Pioneer AVIC-Z1 operation manual Switching the 5.1ch setting, Chapter

1 Touch [Rear SP] in the System Settings menu.

2 Touch [Full] or [Sub.W] to switch the rear output setting.

❒When no subwoofer is connected to the rear output, select Full. When a subwoofer is connected to the rear speaker leads directly, select Sub.W.

3 Touch [Preout] to switch the subwoofer output or non fading output.

❒When the [Rear SP] setting is Sub.W, [Preout] is invalid.

❒Even if you change this setting, there is no output unless you turn [Non Fading] or [Sub Woofer] in the Audio Settings menu [On].

➲“Using non fading output” ➞ Page 150

➲“Using subwoofer output” ➞ Page 150

Switching the 5.1ch setting

When the navigation system is combined with the multi-channel processor system (sold sepa- rately), you can use the multi-channel sound.

Enter the following setting when combining the multi-channel processor system.

•DO NOT enter this setting before you con- nect the multi-channel processor system. (If this setting is entered, the Front RCA will output maximum volume for the multi- channel processor system.) Pioneer is not responsible for any damage to the speaker equipment caused by ignoring this warn- ing.

❒This setting is possible only when the optical cable connection box (supplied with the Multi- channel processor) is connected to the navi- gation system.

1 Touch the source icon and then touch [OFF] to turn source off.

When the source icon is not displayed, you can display it by touching the screen.

2 Touch [5.1Ch Setup] in the System Set-

tings menu.	AV
If you touch [5.1Ch Setup], it will be turned
[On]. If you touch [5.1Ch Setup] again to turn
[Off] the setting, [5.1Ch Setup] will disap-
pear. If you want to turn it [On] again, you
have to repeat the procedure from the Step1.

Other Functions

Selecting the video for “Rear display”

You can choose either to show the same image as the front screen or to show the selected source on the “Rear display”.

1 Touch the source icon and then touch [REAR SCREEN].

Each touch of [REAR SCREEN] changes the settings as follows:

•MIRROR — The video on the front screen of the navigation unit is output to the “Rear display”

•DVD — The video and sound of the DVDs are output to the “Rear display”

•AV — The video and sound of the AV INPUT are output to the “Rear display”

❒When MIRROR is selected, the following restrictions are applied to “Rear display”.

— The TV tuner connected with AV-BUS, its	Chapter
— When selecting Rear View in the map dis-
“Video image” cannot be output. (Connect
with TV tuner’s rear output to “Rear display”
directly.)
play, nothing is displayed.	16
— All sounds cannot be output for “Rear dis-	CustomizingtheAudio withAudioVisual
play”.
— There is no picture on “Rear display” while
[Picture Adjust] for [Back-Camera] is car-
ried out.
— The map screen navigation images output
to the “Rear display” differ from standard
NTSC format images. Therefore, their quality
will be inferior to the images that appear on	Setting
the front screen.
❒ When DVD is selected, the following	related
— When the CD or MP3 disc is set in the built-
restrictions are applied to “Rear display”.
in DVD drive, nothing is output.

157