Furuno 851 MARK-2 installation manual Entering Initial Settings, Installation setup 2 menu

3. ADJUSTMENT

● INSTALLATION SETUP 2 ●

Select item and option by trackball.

1.Align Heading

2.Adjust Sweep Timing

3.On Hours 0000019.8 H

4.Tx Hours 0000016.0 H

. . . . . . . . . . . . . . . . .

Press HM-OFF to temporarily hide menu.

<Press MENU for main menu.>

Figure 3-6 Installation setup 2 menu

3.4Entering Initial Settings

1.At the Installation Setup 1 menu, press the omnipad to select Key Beep. (Key Beep turns on or off the buzzer which sounds when a key is pressed.)

2.Press the omnipad to select OFF or ON.

3.Select Hdg Sensor.

4.Select type of heading sensor connected to the radar; MAGnetic compass or GYROcompass.

5.Press the [ENT] key.

Leave the menu open to complete the next several adjustments.

3-4