1. MOUNTING
4.Pass flat washers, spring washers and nuts onto hex bolts. Fasten by tightening nuts. Do not fasten by tightening the hex bolts; seal washers may be damaged.
Seal washer |
| |
| Antenna | |
Rubber mat | unit | |
Mounting | ||
| ||
| platform | |
Flat washer | Silicone | |
| sealant |
Figure 1-7 How to fasten antenna unit to mounting platform
5.Coat flat washers, spring washers, nuts and exposed parts of bolts with silicone sealant.
6.Prepare ground point in mounting platform (within 300 mm of ground terminal on antenna unit) using M6 x 25 bolt, nut and flat washer.
7.Run the ground wire
8.Coat ground terminal and ground point with silicone sealant as shown in Figure
|
| Hex bolt | ||
Ground |
| Flat washer | ||
| Flat washer | |||
terminal |
| |||
|
| Spring washer | ||
Silicone | OR | Hex nut | ||
|
|
| ||
sealant |
| GROUND |
| |
|
| Hex nut | POINT |
|
Ground |
|
|
| |
| Spring washer | |||
wire |
| |||
| Flat washer | |||
|
| |||
|
| Hex nut | ||
| Weld here. | |||
GROUND |
|
|
|
|
TERMINAL |
| Silicone | ||
|
| |||
|
| sealant | ||
|
| Ground | ||
|
| wire | ||
|
| Antenna | ||
|
| unit | ||
