Nortel Networks 4050 manual Change the admin user password, if desired

58Chapter 2 Initial setup

16Change the admin user password, if desired.

Enter a password for the "admin" user:

Re-enter to confirm:

Make sure you remember the password you define for the admin user. You will need to provide the correct admin user password when logging in to the Nortel SNAS 4050 (or the Nortel SNAS 4050 cluster) for configuration purposes.

17Run the Nortel SNAS 4050 quick setup wizard. This creates all the settings required to enable a fully functional portal, which you can customize later (see “Configuring the domain” on page 117).

For information about the default settings created by the wizard, see “Settings created by the quick setup wizard” on page 60.

a Start the quick setup wizard.

Run NSNAS quick setup wizard [yes]: yes

Creating default networks under /cfg/domain 1/aaa/ network

bSpecify the pVIP of the Nortel SNAS 4050 device.

Enter NSNAS Portal Virtual IP address(pvip): <IPaddr>

cSpecify a name for the Nortel SNAS 4050 domain.

Enter NSNAS Domain name: <name>

dSpecify any domain names you wish to add to the DNS search list, as a convenience to clients. If the domain name is in the DNS search list, clients can use a shortened form of the domain name in the address fields on the Nortel SNAS 4050 portal.

Enter comma separated DNS search list (eg company.com,intranet.company.com):

320818-A