Nortel Networks 4050 manual Client Filters configuration fields

218Chapter 5 Configuring groups and profiles

2Enter the Client Filter information in the applicable fields. Table 34 describes the Client Filter configuration fields.

Table 34 Client Filters configuration fields

Field	Description
Filter ID (Index)	An integer in the range 1 to 63 that uniquely identifies
	the filter in the Nortel SNAS 4050 domain.
Name	Names the filter.
	• name is a string that must be unique in the
	domain.
	You reference the client filter name when configuring
	the extended profile.
TunnelGuard Check Passed	Specifies whether passing or failing the TunnelGuard
	host integrity check triggers the filter.
	• true — the client filter triggers when the
	TunnelGuard check succeeds.
	• false — the client filter triggers when the
	TunnelGuard check fails.
	• ignore — passing or failing the TunnelGuard
	check will not trigger the client filter.
	The default is ignore.
	For example, in order to grant limited access rights to
	users who fail the TunnelGuard check, set the value to
	false, create an extended profile that references this
	client filter, and then map the extended profile to a
	restrictive VLAN.
	For information about configuring the TunnelGuard
	checks, see “Configuring the TunnelGuard check using
	the CLI” on page 132 or “Configuring the TunnelGuard
	check using the SREM” on page 168.
Comment	Creates a comment about the client filter.

3Click Apply on the toolbar to send the current changes to the Nortel

SNAS 4050. Click Commit on the toolbar to save the changes permanently.

320818-A