Nortel Networks 4050 manual Ssldump, Output mode

Chapter 4 Configuring the domain 137

The Trace menu displays.

The Trace menu includes the following options:

/cfg/domain #/server/trace

followed by:

ssldump

Creates a dump of the SSL traffic flowing between clients and the portal server. You are prompted to enter the following information:

•ssldump flags and ssldump filter — for more information about the flags and filter expressions available for SSLDUMP using UNIX, see http://www.tcpdump.org/tcpdump_man.html.

•output mode

Options for the output mode are:

•interactive — captured information displays decrypted on the screen. SSLDUMP cannot decrypt any traffic if it is started after the browser. SSLDUMP must be running during the initial SSL handshake.

•tftpftpsftp — the dump will be saved as a file to the file exchange server you specify, using a destination file name you specify. You are prompted to enter the required information. You can specify the file exchange server using either the host name or the IP address.

For TFTP, the number of files sent depends on the amount of captured information. A sequence number is appended to the file name given in the CLI, starting at 1 and incremented automatically for additional files.

For ftp and sftp, you will also be prompted to specify a user name and password valid on the file exchange server.

The default output mode is interactive.

Nortel Secure Network Access Switch 4050 User Guide