Nortel Networks Nortel Snas 4050 configuration roadmap, Configure the network Dhcp server

Chapter 1 Overview 43

•Security & Routing Element Manager (SREM)

The SREM is a GUI application you can use to configure and manage the Nortel SNAS 4050.

The configuration chapters in this User Guide describe the specific steps to configure the Nortel SNAS 4050 using the SREM. For general information about installing and using the SREM, see Installing and Using the Security & Routing Element Manager (SREM) (320199-B).

•Enterprise Policy Manager (EPM) release 4.2

Enterprise Policy Manager (EPM) is a security policy and quality of service provisioning application. You can use EPM to provision filters on the Nortel SNA network access devices. EPM 4.2 supports preconfiguration of Red, Yellow, and Green VLAN filters prior to enabling the NSNA feature. In future releases of the Nortel SNAS 4050 and EPM software, users will have the additional ability to add and modify security and quality of service filters while Nortel SNA is enabled on the device.

For general information about installing and using EPM, see Installing Nortel Enterprise Policy Manager (318389).

•Simple Network Management Protocol (SNMP) agent

For information about configuring SNMP for the Nortel SNAS 4050, see “Configuring SNMP” on page 617.

Nortel SNAS 4050 configuration roadmap

The following task list is an overview of the steps required to configure the Nortel SNAS 4050 and the Nortel SNA solution.

1Configure the network DNS server to create a forward lookup zone for the Nortel SNAS 4050 domain.

For an example, see “Configuration example” on page 779.

2Configure the network DHCP server.

For an example, see “Configuration example” on page 779.

Nortel Secure Network Access Switch 4050 User Guide